KARACHI BUILDING & TOWN PLANNING EGULATIONS,2002(Tables)

THE KARACHI BUILDING & TOWN PLANNING REGULATIONS, 2002
THE KARACHI BUILDING & TOWN PLANNING REGULATIONS, 2002

CONTENTS

Regulations

Particulars

Page No

Chapter # 1

JURISDICTION

1-1

Short title and commencement and extent

1-2

Application of Karachi Building & Town Planning Regulations

1-3

Exemption form building regulations

1-4

Delegation of Powers and Duties

1-5

These Regulations shall supercede the Karachi Building & Town Planning Regulations, 1979

Schedule 1A CONCERNED AUTHORITIES

CHAPTER # 2

DEFINITIONS

General (2-1 to 2-124)

CHAPTER # 3

PERMITS & PROCEDURES

3-1

General

3-2

Permits & Procedures Building Works

3-3

Permits & Procedures Land Development

Schedule 3A-Scrutiny Fee

Schedule 3B-Built up areas in which general development permits may be granted in the absence of a detailed plan

Schedule 3C-Public Notice for change of land use

CHAPTER # 4

LICENSING/REGISTRATION OF PROFESSIONALS

4-1

Qualifications

4-2

Manager of Grant of license

4-3

Licensing Committee

4-4

Functions of the Licensing Committee

4-5

Registration and De-Registration.

4-6

Validity period of licence

4-7

License and renewal fees

4-8

Revocation of license

4-9

Appeal against the Decision of licensing committee

4-10

Reasons for cancellation/suspension of license

4-11

Period of suspension

4-12

Committee for Enlistment of proof engineers

Schedule 4A Registration/licensing fees

CHAPTER # 5

PUBLIC SALE PROJECTS

5-1

No objection certificates for sale of units in buildings

5-2

No objection certificate for sale of plots in public sale projects

CHAPTER # 6

VIOLATIONS OF LAND DEVELOPMENT

6-1

Removal of prevention of violation

6-2

Enforcement by MP & ECD

6-3

Appeals

6-4

Finality of orders or determinations

CHAPTER # 7

DANGEROUS BUILDINGS

General

Technical committee on Dangerous Buildings (TCDB)

Buildings unfit for human habitation and notice of prohibition

Alteration/Modification/Updates for Repairs of Dangerous Buildings of Category 2

Demolition of Dangerous Buildings on expiration notice period

Extension of period for repairable Buildings

Evacuation of Dangerous Buildings

CHAPTER 8

TEMPORARY WORKS IN CONNECTION WITH BUILDING OPERATIONS (SAFETY AND SECURITY MEASURES)

Site Hoardings

Use of public streets

Obstruction to be lit and marked

Utility Services not to be Obstructed

Removal of Obstruction after Completion of Works

Stability of Adjacent Buildings

Filling of Excavated Site

Adequate Safety Measures

Supervision of Demolition Work

Safe Loading

Scaffolds

Road side Protection

Working Platform

Guard Rails

Ladders

Work on Sloping Roofs

Precautions for Raising and Lowering Loads

CHAPTER 9

SPACE REQUIREMENTS IN AND ABOUT BUILDINGS

Space for Electrical sub station

Method of measuring minimum clear space

Separate approach for every building

Projections beyond property limits

Allowable projections

Residential buildings

Commercial Buildings

Staircases

Lifts

Minimum Requirements of Places of Assembly

Godowns and Warehouses

CHAPTER # 10

LIGHTING AND VENTILATION

Size of external openings

Size of internal openings

Internal Air Wells

Permanent Opening in Kitchen

Water Closet, bath room and ablution places

Garages

Staircases

Mechanical Ventilation and central Air-conditioning waiver & minimum requirement

CHAPTER # 11

BUILDING STRUCTURE DESIGN AND CONSTRUCTION REQUIREMENTS

Loads and Design

Seismic Design

Sub Soil Investigation

Wind Load

Erection on Reclaimed site

Protection of existing services

Foundation near drains

Specifications

Testing of materials

Supervision

CHAPTER # 12

WATER SUPPLY, DRAINAGE & SANITATION

Water Service Pipe

Minimum Storage capacity for Category IV Buildings

Recycling plant and treatment of effluent/sewage

Sanitation and Solid Waste

Digester/Septic tank

Soil Pipes, waste pipes and ventilating pipes

Sanitary provisions

Manholes and inspection chambers

CHAPTER # 13

FIRE RESISTANCE AND FIRE PRECAUTIONS

General

Stand Pipes System

Automatic Sprinkler system

Sprinkler system construction

Manual fire extinguishing equipment

Installation of interior fire alarm system

Signal stations

CHAPTER # 14

FIRE RESISTIVE STRUCTURAL REQUIREMENTS

Fire Resistance

Test of fire resistance

External Walls

Separating walls and fire walls

Compartmentalization

Construction of fire walls

Openings in fire walls

Direct Access for Ground Floor and Above

Protected Shafts

Fire Resistant Doors

Miscellaneous Provisions

Enclosures for Cinematographic Equipment

Steel and Metal Structures

Air Conditioning Ducts

CHAPTER # 15

PRESERVATION OF HERITAGE BUILDINGS

Definition

Designation and Declaration of Special Interest Structures

Approval of Building Plans for Heritage Buildings

Approval for Demolition, Alteration or Extension

CHAPTER # 16

WIDENING OF ROADS

Definitions

Notification of Road Widening Scheme

Roads under Road Widening Scheme

CHAPTER # 17

STANDARDS FOR LAND DEVELOPMENT

General Standard/Area Standards

Amendments to General Standards or Area Standards

Declaration of Interim Control Areas

Schedule 17A Areas Designated as interim control area

CHAPTER # 18

SUB-DIVISION AND AMALGAMATION OF LAND AND CHANGE OF LAND USE

Major Sub-Division and Minor Sub-Division

Conditions for special development permits for Major Sub-Division

Sub-Division and Amalgamation of plots

Change of land use

Commercialization of plots

CHAPTER # 19

GENERAL STANDARDS: LAND USE CLASSIFICATION

General

Urban Uses – Residentiary

Urban Uses – Non-Residentiary

Semi Urban Uses

Non-urban Uses

CHAPTER # 20

GENERAL STANDARDS: BULK AND SPATIAL

Plot Areas

Plot Shapes

Density Standards

Land Allocation

CHAPTER # 21

GENERAL STANDARDS: HIGHWAYS, MAJOR ROADS, BOULEVARDS, STREETS AND LANES

Pedestrian Lanes

One way streets (Types A, B, C)

Two way streets (Types D, E, F, G)

Highways, Major Roads and Boulevard (Types H, I & others)

Visibility at Cross Roads

Street Lines and Building Lines

CHAPTER # 23

GENERAL STANDARD: COASTLINE RECREATION DEVELOPMENT

Interim control area

Sectors of Karachi Coastal Zone

Environmental Planning Zones

Utilization area (areas for planning)

Building Regulations

CHAPTER # 24

PARKING REQUIREMENTS

Scope

Geenral condition

Cars Lifts

Application of Parking Requirements

Parking Requirements for other uses

Standards for parking spaces

Exemption from provision of parking space

Lighting standard for parking lot

CHAPTEr # 25

ZONING REGULATINS/AREA STANDARDS

Introduction

Residential

Commercial

Flat Sites Category

Amenity Plots

Industrial Areas (other than defined in clause 25-9)

Cottage industries, work shops, godowns

Dairy plots

Old City areas

Cinema house

Petrol Stations

CNG Stations

Religious buildings

FIGURE-1

FIGURE-2

FIGURE-3

FIGURE-4

FIGURE-5

FIGURE-6

FIGURE-7

FIGURE-8

APPENDIX

A

Detailed plans incorporating area standards

B

Rehabilitation schemes of Govt. of Pakistan under control of KDA on Agency Basis

C

Development Schemes of private developers, private cooperative housing societies and colonies approved by the Karachi Development Authority upto March, 1979.

D

Areas housing societies under the control of Karachi Metropolitan Corporation

E

Detailed plans incorporation area standards of schemes and housing societies under cantonments Ministry of Defence

THE KARACHI
BUILDING & TOWN PLANNING
REGULATIONS, 2002

[Karachi the April 04, 2002]

Notification No. SO(Land)HTP/KBCA-3-39/2000. In exercise of the powers conferred by section 21-A of the Sindh Building Control Ordinance, 1979, the authority is pleased to make the following regulations:-

CHAPTER 1 – JURISDICTION

1-1. Short title and commencement and extent.
1-1.1. These Regulations may be called the Karachi Building and Town Planning
Regulations 2002.

1-1.2. These Regulations shall come into force at once.

1-1.3 These Regulations shall apply to the whole City District of Karachi but
shall not apply to the cantonment area of the projects of the National Security declared by the Federal Government.

1-2. Application of Karachi Building and Town Planning Regulations.

Every person who intends to carry out building and development work shall
comply with the requirements of these Regulations.

1.3. Exemption from Building Regulations.
In order to meet emergency conditions and the regulations of persons in the sub-economic income group, the Government may declare special areas where these regulations may be relaxed for a specific period of time, after which these buildings shall become subject to special low cost housing codes.

1-4. Delegation of Powers and Duties.

1-4.1 The Government hereby delegates to the Authority, Master Plan and Environmental Control Department and to the concerned Authorities listed in Schedule 1A, the powers and duties assigned by these Regulations.

1-4.2. From time to time the Government may, by notification, modify or withdraw from
any Concerned Authority any such powers or duties, or add to or revise the list in Schedule 1A, or may recommend the revision of the boundaries of any of the jurisdiction of any Concerned Authority specified therein, after following the procedures specified in these Regulations.

1-5. These Regulations shall supercede the Karachi Building and Town Planning Regulatlons,1979.

Notwithstanding the replacement of the Karachi. Building & Town Planning Regulations-1979 by these Regulations as noted in Clause-(1) above hereinafter referred to as the said Regulations and Rules, any instruction issued, action taken, funds created or established, departmental inquires and proceedings initiated under the said Regulations and rules and in force immediately before commencement of these Regulations (Karachi Building & Town Planning Regulations-2002) shall be deemed to have been passed, issued, established, initiated or made in these Regulations (Karachi Building & Town Planning Regulations-2002), as if these regulations were in force at the time of which such orders were passed, instructions issued, and made and shall continue to have effect accordingly.

Schedule 1A-CONCERNED AUTHORITIES

Subject to the provisions of Chapter 1 of the Regulations, the following public agencies are designated as concerned authorities for the respective areas and purposes here indicated:

S.NO

CONCERNED AUTHORITIES

JURISDICTION

POWERS

1

City District Government

All areas within its jurisdiction other than those under the jurisdiction of other public agencies listed here.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

2

Cantonment Boards of the Ministry of Defence

Areas of housing schemes, industrial estates or other land under their respective jurisdiction in Karachi Division which are leased to or developed by others.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

3

Karachi Port Trust

Areas of housing schemes, industrial estates or other land under its jurisdiction, which are leased to or developed by others.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

4

Pakistan Railways

Areas of housing schemes, industrial estates or other land under its jurisdiction, which are leased to or developed by others.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

5

Ministry of Works Government of Pakistan

Areas of housing schemes, industrial estates or other land under its jurisdiction, which are leased to or developed by others.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

6

Sind Industrial Trading Estates Karachi

Areas of housing schemes, industrial estates or other land under its jurisdiction, which are leased to or developed by others.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

7

Sindh Katchi Abadies Authority

All areas within its jurisdiction other than those under the jurisdiction of other public agencies listed here.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

8

Board of Revenue

All areas within its jurisdiction other than those under the jurisdiction of other public agencies listed here.

All powers assigned to Concerned Authorities by these Regulations framed under the Ordinance as amended from time to time.

CHAPTER 2- DEFINITIONS

General

2-1. In the Regulations hereinafter contained, the following terms and expressions shall have the meanings hereinafter respectively assigned to them, unless such meaning be repugnant to or inconsistent with the context or subject matter in which such words or expressions occur:

2-1.1. Words imparting the singular number shall include the plural:

2-1.2. Words imparting the plural shall include the singular; and

2-1.3. Words imparting the masculine gender shall include feminine gender as well.

2-2. “Addition” means the addition of any unit/structure to any building/structure constructed in accordance with these Regulations, and after obtaining the Occupancy Certificate of the building/structure being added to.

2-3. “Agriculture” means and includes pasture, horticulture, breeding of livestock including poultry, fish and bees, and the use of land for any purpose ancillary thereto.

2-4. “Allottee” means a person or a body who purchases a unit in a public sale project.

2-5. “Alteration” means any change brought about after the approval of Building
plan without affecting or violating any provision of these Regulations.

2-6. “Amalgamation” means the joining of two or more adjoining plots of the same land use into a single plot in accordance with these Regulations.

2-7. “Amenity Plot” means a plot allocated exclusively for the purpose of amenity uses as define in Chapter 19 of these Regulations, such as Government uses in 19-2.2.1, Health and Welfare uses in 19-2.2.2, Education uses in 19-2.2.3, Assembly Uses in 19-2.2.4, Religious uses in 19-2.2.5, Parks and Play grounds in 19-2.2.7 Burial grounds in 19-2.2.8, Transportation right-of-way in 19-2.2.9, Parking in 19-2.2.10 and Recreational Areas in 19-2.2.12.

2-8. “Ancillary Building” means a building subservient to the principal building on the same plot e.g. servant quarters, garages, guardroom etc

2-9. “Apartment” means an independent residential unit consisting of at least one habitable room, bathroom, toilet, and cooking facilities in an apartment building as defined in 2-10 below.

2-10. “Apartment Building” means a building having more than one storey and containing more than two apartments sharing common staircase or access space.

2-11. “Approved” means approved in writing by the Authority.

2-12. “Arcade” means a covered walkway or a verandah between the shops and the street/footpath on which the shops abut.

2-13. “Architectural Plan” means a plan showing the arrangements of proposed building works, including floor plans, elevations and sections in accordance with the requirements of these Regulations.

2-14. “Area Standards” means those zoning regulations or other land development requirements or restrictions referred to in these Regulations which have heretofore been, or may hereafter be adopted for a specified area or areas by, or on behalf of, MP&ECD whether or not as part of a detailed plan.

2-15. “Assembly uses” Assembly uses as defined in Regulation 19.2.2.4.

2-16. “Attached Building” means a building, which is joined to another building on one or more sides by a common waft or walls.

2-17. “A.C.I.” means American Concrete Institute.

2-18. “Balcony” means a projection from a wall of a building on an open space or a public street.

2-19. “Basement” means a storey of a building partially or wholly below ground level.

2-20. “Bath Room” means a room containing a water tap/wash basin and a shower or a bathtub or a bath tray, and may with or without a W.C.

2-21. “Building Line” means a line upto which any part of a building from its lowest level, including any and all foundations, or other structure, abutting on a public street or a road planned future public street, may extend, provided always that such line is within the property line of such building or cut line as provided in these Regulation of such plots.

2-22. “Building Designer” means a person who had been granted license to act as such under Karachi Building Control Licensing Regulations 1982.

2-23. “Building Supervisor” means a person who has been granted a license to act as such under these Regulations.

2-24. “Building Works” means erection or re-erection/modification including complete or partial demolition of a building including full or partial thereof or making additions and alterations to an existing building.

2-25. “B.S.S.’ mean the latest applicable published edition of the relevant British Standard Specifications.

2-26. “B.S.C.P.” means the latest applicable published edition of British Standard Code of Practice.

2-27 “Carpet Area” means the net floor area within a rent-able/saleable unit excluding the area of peripheral walls but including the area of internal walls and columns.

2-28. “Car Porch” means a shelter or a shed for a car, which is permanently open on at least two sides.

2-29. “Chimney” means a structure enclosing one or more flues, and includes any opening therein for the function of a heat producing appliance/fireplace.

2-30. “Chief Controller of Buildings (CCOB)” means the authorized officer of the Authority to effect implementation of these Regulations.

2-31. “City District Karachi” includes the areas within the jurisdiction of the City District Government.

2-32. “Clinical Building” means the buildings specified for health and welfare uses as defined in sub-clause 19-2.2.2.

2-33. “Commercial Building” means a building constructed for commercial use as defined in sub-clause 19-2.2.6.

2-34. “Commercial use” means commercial (trade uses such as shops shopping centres, markets and other uses as defined in sub-clause 19-2.2.6.

2-35. “Compartment” as defined in Regulation No.14-5.

2.36. “Completion Plan” means an as built plan submitted to the Authority for the
purposes of obtaining approval and occupancy certificate.

2-37. “Concerned Authority” means the public agency designated to perform the functions of the Concerned Authority for the purpose of these Regulations (Schedule IA) or any other Authority notified by the Government, from time to time.
2-38. “Controller of Buildings (COB)” means the authorized officer of the Authority to effect implementation of these Regulations in respective circles/areas.

2-39. “COS -Compulsory Open Space ” means that part of a plot which is to be left completely open to sky, over which no structure or an integral part of the building shall be permitted except permissible projections, basement, steps, septic under ground tanks, soak pits, water reservoirs and lines for sewage, water, electricity, gas, telephone etc., or those structures required by civic agencies such as electric sub-station permitted elsewhere in these Regulations.

2-40. “Corner Plot” means a plot situated at the intersection of two or more streets/roads.

2-41. “Cottage Industry” includes small and medium size repair shops, handicrafts, and small-scale inoffensive non-hazardous and non-obnoxious production and manufacturing units in areas, specified for such uses.

2-42. “Covered Area” same as Floor Area Regulation 2-58.

2-43. “Dangerous Building” means a building or structure which is declared as structurally unsafe and/or which is hazardous as specified in Chapter-7 .

2-44. “Depth” in respect to a building means the measured distance perpendicular from the outermost part of such building at its rear excluding projections as permitted in these Regulations.

2-45. “Detached Building” means a building not joined to another building on any side by a common wall.

2-46. “Development Permit” means any general or special permit issued, including a permit customarily denominated as a “No Objection Certificate”, “planning permit”, “town planning permit” or other document having the effect of permitting development as defined in these Regulations.

2-47. “Development Plan” means the plan meant for the development of Karachi currently adopted by the Master Plan & Governmental Control Department and concerned agencies notified by the Statutory Authority or as revised from time to time.

2-48. “Development Works” means use or land as per approved plan, design and specifications.

2-49. “Engineer” means a person currently registered as such under PEC Act-1975.

2-50. “External Wall” means any outer wall of a building abutting on an external or internal open space on adjoining property lines.
2-51. “Factory” means a building or part thereof used for manufacture, production or preparation of any article.

2-52. “Fire Escape” means an exit from a building, for use in the event of fire.

2-53. “Flat” means as defined in “Apartment” clause No.2-9.

2-54. “Flat sites” means plots designated as such for multi-family residential uses.

2-55. “Floor Area” means horizontal area of floor in a building covered with roof, whether or not enclosed by walls but excluding ancillary covered spaces and projection allowed under these Regulations.

2.56. “Floor Area Ratio” means the total floor area of a building divided by the area of the plot.

2-57. “Footpath” means the portion of a plot of land covered, at any level, by a building or part thereof other than basement.

2-58. “Government means the Government of Sindh.

2-59. “Ground Floor” means the floor of any structure built just above the plinth level.

2-60. “Habitable Room” means a room to be used primarily for human habitation.

2-61. “Head Room” means the clear vertical distance measured between the finished lower level and the underside of lowest obstruction such as ceiling or, rafter, whichever is lower.

2-62. “Height of a Building” means the vertical measurement from the highest part of the crown of the road along the length of the plot boundary of such a building, on the side determined to be the front of such plot, to the highest part of the building.

2-63. “Height of a Room” means the vertical distance measured between the finished floor level and under side of the ceiling.

2-64. “Hoarding” means a fence of temporary character erected around a building site on which erection, demolition or repair work is in hand.

2-65. “House/Bungalow means an independent residential building for the use of people, a family/families having at least one habitable room with a kitchen, a bath, and a toilet.

2-66. “Housing/Dwelling Unit” means a part or whole of a residential building capable of being used independently for human habitation.
2-67. “Industrial Building” means a building constructed on a plot allotted exclusively for the purpose of industry, under these Regulations.

2-68. “Inspection Chamber” means any chamber constructed so as to provide access thereto for inspection and cleaning.

2-69. “Land” includes the earth, water and air, above, below or on the surface, and anything attached to the earth, and has the meaning assigned to it under Clause (a) of Section 3 of the Land Acquisition Act, 1984.

2-70. “Land Development” has the meaning assigned under clause 3-3.1.

2-71 “Land Use Plan” means a land use plan, referred to in Appendix A. heretofore or hereafter approved by, or on behalf of MP&ECD for a specified existing or new community or a major area thereof, which may include area standards or other provisions relating to.

2-71.1. The precise location and characteristics of road, other rights of way, and utilities.

2-71.2. the dimensions and grading of plots and the dimensions and siting of structures;
2-71.3. the precise location and Characteristics of permissible types of such development; and
2-71.4. any other planning matters which contribute to the development, renewal, maintenance and use of the area as a the whole.

2-72. “License” means a permission, granted under these Regulations by the Authority to perform such functions as are allowed under these Regulations.

2-73. “Licensee” means an individual’s or firm who has been duly licensed by the Authority.

2-74. “Licensed Non Professionals” means person/s or firm granted license under these Regulations, who are not registered with any of the statuary bodies.

2-75. “Light Industry” means an industry defined as such by the Industries Department or as defined in these Regulations.

2-76. “Loft” means a horizontal slab used only for storage purposes, which shall be allowed in kitchens, baths and store rooms/shops with access from inside only upto 5′-0″ clear height between the loft floor and roof height and shall not exceed 30% of the floor area of the room.

2-77. “Master Plan” means a Development Plan for an area providing short terms and long terms policy guideline for a systematic and controlled growth in future.
2-78. “Master Plan & Environmental Control Department (MP&ECD) is the Department established to implement Town Planning and Environmental Control Regulations or City District Karachi in accordance with these Regulations.

2-79. “Medical Waste” means such waste or items which can, or is likely to, cause infection, and without prejudice to the generality above, includes needles, operating theatre material, surgical gloves, bandages, blood, bones and flesh etc.

280. “NOC” means No Objection Certificate as defined in these Regulations.

2.81. “Notification” means a notification published in the Sindh Government Gazette.

2.82. “Obnoxious Industries” include, amongst others brick kilns, coke ovens, salt glazing, sulphur working, making of cellulose lacquer, pitch bitumen, charcoal burning, gut scraping, tannery, glue making, fish meal, soap boiling, tallow making, skin dyeing and those which may be specified as Obnoxious Industries by the Industries Department from time to time.

2-83. “Ordinance” means the Sindh Building Control Ordinance, 1979.

2-84. “Open Staircase” means a staircase at least two sides of which are open, except for a guardrail or wall of a maximum nominal height of 4ft.(1.2m), and which has no roof.

2.85. “Oversee Committee” means a Committee notified under Ordinance, as amended from time to time to oversee the functioning of the Authority.

2-86. “Owner” means a person or persons holding title to a piece of plot or land/construction thereupon.

2-87. “PEC” means Pakistan Engineering Council established under PEC Act, 1976.

2-88. “Pedestrian Lane” means thoroughfares intended exclusively for pedestrian traffic at least 10ft. (3m wide).

289. “Party Wall” means a wall separating adjoining properties.

2-90. “Pergola” means a horizontal structure of grid or trellis, the voids of which must be at least 75 percent of the total area in the plan of the pergola and are open to sky.

2-91. “Person” includes any individual, company or association of bodies or individuals, whether incorporated or not, or any public agency.

2-92. “Place of Public Worship” means a building designed for the purpose of performance of religious functions.

2-93. “Plinth” means the height of the finished floor level of the ground floor, measured from the top of the finished surface of the road serving the plot, taken from the centre of the property line of the plot along the road. In case of more than one road serving the plot, the plinth will be measured from the road providing principal access at the higher level. The height of the plinth shall be limited to
4′-6″, except on plots where the natural contours are more than 4-6″ over at least 40% of the plot area as measured from the point at the centre of the property line of the road adjacent to it

2-94. “Prescribed” means prescribed by these Regulations.

2.95. “Professional” means an individual or firm registered as such under the PCATP Ordinance-1983 and PEC Act.

2-96. “Proposed Plans” means plans submitted for approval in respect of proposed building works and/or land, development work and/or land development work.

2-97. “Prescribed Form” means form prescribed for various purposes by the Authority.

2-98. “Preservation” means protection of any building or area from any plot or development which may destroy or change its character.

2-99. “Professional Engineer” means a person recognized as such under PEC Act and Rules & Regulations framed there under.

2-100. “Property line” for the purposes of these Regulations means that for part of plot boundary which separates private property from the public property or a private property from another private property.

2-101. “Proof Engineer” means registered with Pakistan Engineering Council (PEC) as Consulting Engineer (Structural Design) and with minimum 10 years experience of structural design of building works and whose name is listed on the panel of Proof Engineers maintained by the Authority.

2-102. “Public Agency” includes a person or body of persons, autonomous body appointed by or under the authority of Government or the Federal Government and includes Town Councils and Union Councils, as defined in the Sindh Local Government Ordinance, 2001.

2-103. “Public Use Building” means a building designed for public use and includes a dispensary, post office, police station, Tonga stand and transport stand, town hall, public library, cultural centre, cinema and such other buildings which are meant for public use facilities.

2-104. “Public Open Space” means open spaces including parks, playgrounds. waterways, streets, road and lanes and such other places as defined in these Regulations.

2.105. “Public Sale Project” means a project designed with the intention of transferring to the public on ownership basis by way of public sale and for which Sale NOC is obtained from the Authority.

2-106. “Renewal” means renewal of any permission given by the Authority in accordance with the Regulations.

2.107. “Residential Building” means building constructed for residential purposes, e.g. bungalow, town house, flats and such other buildings.

2-108. “Regulations” means Karachi Building & Town Planning Regulations 2002 framed under Ordinance, as amended from time to time.

2.109. “Repairs” means repair work to services, painting, whitewashing, plastering, pointing and paving and such other works without change in the approved/completion plan.

2.110. “Revised/Amended Plan” means previously approved drawings/plans re-submitted for approval in accordance with the provision of these regulations.

2-111. “Road” means a public access-way, including any land reservation for such public access-way whether public or private.

2-112. “Scrutiny Fee” means a fee to be determined and levied as per the provision of the Ordinance, as amended from time to time.

2-113. “Society” means an organization registered as such under the relevant laws.

2-114. “Shop” includes any room or part of a building used, wholly or mainly, for the purpose of trade or business but shall not be used for any activity as may cause noise and nuisance in the neighborhood.

2-115. “Sub-Division” means the division of land held under the same ownership in to two or more plots.

2-116. “Sub-division plan” means a layout plan for a proposed sub-division duly approved by or on behalf of the concerned Authority/MP&ECD as provided in these Regulations.

2-117. “Sun-Shade” means an outside projection from a building to provide protection from weather, which cannot be converted to habitable space.

2-118. “Supervision” means to oversee and supervise the implementation of approved Architectural/Town Planning/Engineering design and specifications during the execution of buildings/development works at site.

2-119. “Temporary Structure” means a structure built/constructed purely on temporary basis, wholly within the plot with the approval of the Authority for a specific period of time and which shall be demolished on completion of the project.

2-120. “Toilet” means a space for personal ablution which includes at least one urinal and/or W.C. (water closet).

2-121. “Total Floor Area” means the sum of floor areas of all the floors of all the buildings on a plot, less exemption as permitted in these Regulations.

2-122. “Transport Department” means the Transport Department of the City District Karachi.

2-123. “Ware house” means a building in which goods are stored.

2-124. “Waste” includes industrial, hospital and municipal waste and sewage.

CHAPTER 3 PERMITS AND PROCEDURES

3-1. GENERAL

3-1.1. Public Notice

3-1.1.1. Public notice, whenever required under these Regulations, shall be given
in the following manner:

1. They shall be given in the manner as A3 size in leading newspapers
minimum one each (Urdu & English) as a display advertisement and not a classified advertisement.

2. By affixing copies thereof display on the site minimum size 3×4 ft.
(1×1.2m) on board and at prominent AUTHORITY Public Notice Board.

3-1.1.2. The notice shall state the place at which, and the officers with whom
replies/objections may be filed within a specified time.

3-1 1.3. The officer so designated shall consider the suggestions or objections filed or testimony given and submit a report to the relevant department of City District Government MP&ECD or the Concerned Authority/Authority as the case may be as defined under these Regulations
3-1.1.4. A copy of the notice shall be submitted to the Concerned Authority which may have referred the matter or under whose jurisdiction the land falls.

3-1.1.5. Public notice relating to change of land use shall be issued under the Authority of MP&ECD which conform to the format at schedule 3C.

3-1.2. Revocation of Development Permits.
Where a development permit has been granted, if the authority which granted it, finds that any of the provisions of the Regulations or any conditions of the development permit have been violated, the Authority may issue an order revoking the permit:

3-1.2.1. If the person has misrepresented facts or has suppressed the facts;

3-1.2.2. If the person responsible for the violation has not taken the corrective action directed by such Authority within the time specified provided that the Authority has given such person an opportunity to be heard on the matter.

3-1.3. Classifications of Development Works
For purposes of these Regulations, all buildings and land development shall be classified as per Table-3.1.

3-1.4. Engagement of Professional

3.1.4.1. Every person who intends to carry out building/land development works or to demolish a building or to carry out addition/alteration or repairs in a building, shall engage respective Professional as per tables below, to prepare Architectural/Town Planning Engineering Design and Drawings including specifications and to supervise their respective works at site.

3-1.4.2. The requirement for engagement of Professionals and their authorization as per Clause 3-1.4.1 shall be as given in Tables 3.2 and 3.3.

Table 3.1 Categories of Development Works

CATEGORY I

- Bungalow on plot up to 120 Sq Yds (100.33 Sq M).
- Any other building on plot up to 120 Sq Yards (100.33 M) with
height up to 33 ft (10M).

CATEGORY II

- All bungalows.
- Any other building with total floor area up to 20,000 Sq ft
(1858.74 Sq M) and/or height up to 50ft (15.2 M) other than
Category I & IV.

CATEGORY III

- All buildings with total floor area greater than 20,000 sq ft
(1858.74 Sq M) and/or height greater than 50 ft (15.2 M) other
than Category IV.

CATEGORY IV

- Public use buildings with total floor area more than 3600 sq ft
(336 Sq M) buildings for essential facilities, public sale
buildings.

CATEGORY V

- Land development works for land with area 2.5 acres (1
hectare) and greater.

Table 3.2 Procedure for Approval

S.No

Category

Plan signed by Professional

Approval Granted

1

I

Building Designer or Architect or Professional Engineer (Civil) or Structural Engineer

(One Stage) Final Approval

2

II

Architect and/or Structural Engineer*

(One Stage) Final Approval

3

III

Architect and Structural Engineer**

(Two stages) Architecture Approval Submission of Structural designs/drawing for record and vetting.**

4

IV

Architect and Structural Engineer Plumbing and electrical drawings in public sale buildings by relevant professional.

(Two Stages)
Architectural Approval Structural design and drawing duly vetted by proof Engineer Plumbing and electrical drawings duly signed by relevant professional.

5

V

Town Planner

(One Stage)
Final Approval

* Architect and Structural Engineer are both required for residential bungalows on more than 400 Sq Yards (336 Sq M) plots.

** Structural vetting by a Proof Engineer is required for any building having a height of more than ground plus four floors or 50 ft (15.2 M) and/or total floor area more than 100,000 sq ft (9293.6 Sq M) and for structures of special nature and unusual designs including shields and folder plate systems, water towers and stack like structures, apart from category C and D buildings.

Table 3.3 Maximum Authorization of Professionals

S.No

Professional

Category I

Category II

Category III

Category IV

Category V

1

Building Supervisor

Supervision with 2 years experience

Supervision with 5 years experience

Supervision with 10 years experience

2

Building Designer

Design & Supervision

Supervision

3

Architect

Architectural Design and Supervision

Architectural Design and Supervision

Architectural Design and Supervision

Architectural Design and Supervision

———-

4

Professional Engineer (Civil)

Design and Supervision

Supervision

Supervision with 5 years experience

Supervision with 5 years experience

Supervision

5

Structural Engineer

Structure Design and Supervision

Structure Design and Supervision

Structure Design and Supervision

Structure design and supervision

Structure Design and supervision

6

Proof Engineer

Structural Vetting

Structural Vetting

———–

7

Town Planner

—————–

——————-

——————

——————-

Design and Supervision

3-1.4.3. the responsibility of every Professional signing the plan and documents as above shall be limited to his respective discipline.

3-1.4.4. The professional so engage shall submit to the Authority in writing on prescribed form (ZP-2 in case of building works) of his having undertaken to supervise such work.

3.1.5. Change of Professional

3.1.5.1 Where a professional ceases to be in charge of such building works before the
same is completed, further execution of such work shall forthwith be suspended by the owner until a fresh appointment is made by the owner.

3.1.5.2 the previous professional shall immediately inform the Authority of his
discontinuance from the works (on prescribed form ZP-6 in case of building works).

3.1.5.3 The new professional/s so engaged shall inform the Authority within 15 days of resuming work. He shall assume full responsibility as if he were the author, for the correction and competence of all designs prepared by the Professional previously engaged.

3.1.6 Submission on prescribed form

Every person who intends to carry out building/land development work under these Regulations shall submit application on relevant prescribed form.

3-2. PERMITS AND PROCEDURES – BUILDING WORKS

3-2.1. Definition of Building Works
For the purposes of these Regulations, the following activities shall be deemed to involve Building Works, unless expressly excluded by these Regulations:
3-2.1.1. erection of a structure;
3-2.1.2. demolition of a structure;
3-2.1.3 addition or alteration to any structure;
3-2.1.4. demolition, addition or alteration to any preserved structure declared as a structure of historical or architectural significance:
3-2.1.5. a reconstruction, alteration of the size or material change in the external appearance of a structure.

3.2.2. Submission of Plans for Approval

The Owner shall submit to the Authority:
3-2.2.1. Two sets of all documents relating to the plot together with a letter from the Concerned Authority confirming the title/land use physically fresh demarcated/dimensions of the plot along with the existence of any road widening/cut line reservation.

3-2.2.2. In case of form (ZP-1) for proposed plan, initially three sets and finally six sets of drawings for category I & II of buildings at the time of submission, duly signed by the owner and duly signed and stamped by the relevant Professional. The drawings should show Plans, Sections and Elevations together with other necessary details pertaining to RCC elements; work and covered area etc. of every floor, including basement, of the building intended to be erected, along with a block plan of the site, drawn to a scale of not less then 1:500 (1=40′) showing the position of proposed building and existing building if any; the width and levels if necessary, of the streets on which the pot abuts: and the survey number or the numbers of the adjoining plot or plots, if any, together with the cardinal points; which shall be drawn to a scale of not less than 1:100 (1″=8′). If the building is so extensive as to make a smaller scale necessary, it may be drawn to a smaller scale but not less than 1:200 (1″=16′). Such plans and sections shall show the purpose for which the building or parts thereof are intended to be used; the access to and from the several parts of the building, the position, dimensions, means of ventilation, the proposed height of the plinth and superstructure at the level of each floor, together with the dimensions and descriptions of all the walls, floors, roofs, staircases and elevator, etc. if any.

3-2.2.3. In case of Category III and Category IV buildings:

a) Initially three sets and finally Six sets of architectural working drawing/plans, at the time of initial submission, by the owner and duly signed and stamped by the relevant Professional. The drawings should show Plans, Sections and Elevations of every floor, including basement, of the building intended to be erected, which shall be drawn to a scale of not less than 1:100 (1″=8′). If the building is so extensive as to make a smaller scale necessary, it may be drawn to a smaller scale but not less than 1:200 (1″=16). Such plans and sections shall show the purpose for which the building or parts thereof are intended to be used; the access to and from the several parts of the building; the position, dimensions, means of ventilation, the proposed or the plinth and superstructure at the level of each floor, together with the dimensions and descriptions of all the walls, floors, roofs, staircases and elevator, etc. if any. After architectural approval six sets of structural working drawings and two sets of structural calculations shall be submitted for record duly signed by the owner and stamped by Architect and Structural Engineer respectively. Two (2) sets of design and working drawings for
plumbing and electric work shall be submitted for record purposes and signed and stamped by the concerned Professionals.

b) Structural vetting by a Proof Engineer is required for any building as per table 3.2** The owner/architect will get it vetted by a registered Proof Engineer (enlisted with the Authority). The architect will submit two copies of the calculations and five sets of structural drawings along with the approved concept plan, two copies of vetting Performa (STP & STP.2), one copy of soil report duly signed by the owner, structural design engineer and architect. The proof engineer will return the same to the architect after doing the proper vetting after minimum of 10 days for onward transmittal to the structure section of the authority duly signed and with recommendations of the approval structured clearance. The structure section based on the proof engineer. recommendations will issue a N.O.C. of structural clearance and forward three sets of vetted structural drawings and copies of relevant documents to the concerned zone within seven days of receipt for further processing of the case. The proof engineer will be equally responsible in case there is any error in design, drawing and/or calculations, which may result in a problem in the said building.

c) The soil investigation is to be carried out by a Licensed Geo-technical firm.

d) Two sets of complete soil investigation report including the following signed and stamped by a licensed soil engineer
(i) A minimum of two bore logs up to 30ft.(9m) minimum or as per requirements of the Structural Engineer.
(ii) Bore hole location plan.
(iii) Recommendation for bearing capacity, and type of foundation.
(iv) All necessary laboratory tests and reports.
(v) Recommendations of the Soil Consultant for the type of cement to be used below ground level.
(vi) De-watering scheme for subsoil water if required.

3-2.3. Corrections on Plan.

No corrections or overwriting shall be permitted on plans submitted for approval.
3-2.4. Alteration of Design.
In private residential buildings deviation from the approved building plan shall be allowed (provided it does not violate these regulations) during the construction stage at the responsibility of the concerned licensed/registered professionals. Such deviations shall be regularized on completion of the construction on payment of the requisite composition fee.

Deviations in internal layouts of non-sale public use buildings shall be allowed (provided they do not violate these regulations) during construction stage at the responsibility of the licensed/registered professionals for non-sale public use buildings. Such deviations shall be regularized on completion of construction, on payment of the requisite composition fee. No structural deviations or deviations in the external envelope of the building shall be permitted. The owner shall be required to submit a revised plan for approval before proceeding with the construction of such structural or external envelope changes.

3-2.5. Revised/Amendment of Plan

In public sale building deviation in internal layouts shall not be allowed during the construction stage. No structural deviations or deviations in the external envelope of the building shall be permitted. The owner shall be required to submit a revised plan for approval before proceeding with the construction of such structural or external envelope changes.

3-2.6. Period of Approval

3-2.6.1 After the receipt of an application for permission to carry out building works, the Authority shall:

a) Pass orders granting permission to carry out such building works within 60 calendar days.

b) In the case of refusal/objections, issue the consolidated objections/observations, specifying the provisions of the Regulations to the Professionals within 30 days.

3-2.6.2 If no order is passed on an application within 60 calendar days of its receipt, it shall be deemed to have been sanctioned to the extent to which it does not contravene the provisions of these Regulations or the Master Plan or sanctioned Site Development Scheme, if any, and after giving notice to the Authority, the person may proceed to carry out the said building works at any time within one (1) year starting from the date of submission provided the title of land is clear from all disputes and objections. Except in the case of building which fall in category III and IV of table 3.1.

Plan, or an applicable development plan or detailed plan, or as defined by MP&ECD in the absence of such definition;

3-3.8.3. The provisions of any approved development programme or scheme of a public agency which might be adversely affected by the proposed land development.

3-3.8 4. The need, if any to protect existing resources, installations or investments of the Federal Government, Government or any public agency.

3-3.8.5. Relevant conditions or needs in the neighborhood and community relating to sanitation, road and street networks, traffic and transportation facilities, the existence or absence of municipal services, public amenities, industrial and commercial activities and facilities, air and water quality, other attributes of the physical environment, and significant social and economic characteristics of the inhabitants.

3-3.9. Notice for a Special Development Permit
3-3.9.1. In the case of an application for a Special Development Permit the MP&ECD shall give a public notice in the manner as described in 3-1.1. of these regulations.

3-3.9.2. The applicant or his representative may request, and if so shall be granted, an opportunity to be heard on the matter within such reasonable time, not exceeding 30 days, as shall be fixed by MP&ECD or the Concerned Authority, as the case may be.

3-3.9.3. The determinations made by MP&ECD or Concerned Authority on the applications for development permits shall be known as ‘orders’.

3-3.9.4. If MP&ECD or the Concerned Authority, as the case may be denies the application or grants permission subject to conditions it shall state the reasons for the denial or conditions.

3-3.9.5. An applicant for a development permit shall pay scrutiny/attestation fee to the Concerned Authority and if the matter is referred to MP&ECD, pay to it the prescribed fee for the type of land development there indicated.

3-3.10. Approval of Minor Sub-Division

3-3.10.1. In the case of minor sub-division the Concerned Authority may grant development permit to the owner as per the rules set forth in these Regulations.

3-3.10.2. Applications for development permits for minor sub-divisions shall be made to the Concerned Authority on Prescribed Form.

3-3.11. Approval Procedure for Special Development Permit.

3-3.11.1 For special development permit for major sub-division the owner shall apply to the Concerned Authority having jurisdiction and the concerned Authority shall refer the case to MP&ECD for approval. He shall give a public notice in the manner as described in 3-1.1 of these regulations. Upon approval by MP&ECD, the Concerned Authority shall issue special development permit to the owner.

3-3.11.2. The application shall be accompanied by documentary evidence demonstrating;

a) the payment by the applicant of the scrutiny fees prescribed,

b) the applicant’s ownership of sufficient title in the site to undertake the proposed sub-division and development;

c) the approval of Civil Aviation, Defence Authorities, or any other Concerned Authority, if required ; and

3. compliance with any provisions for rules or regulations under the
Cooperative Societies Act, 1925 if the applicant is a co-operative housing society.

3-3.11.3. The application for approval of special development permit involving major sub-division shall include:-

a) a physical survey, submitted through a town planner, of the site and of any larger tract of the land of which the site is a part, showing the boundary lines of such site and tract, official survey numbers, and existing structures, water courses, wooded areas, streets, roads and other significant physical features within the site and on adjacent land within 600 ft.(182.75m) of the boundary of the site.

b) a topographical survey, with contours at intervals as deemed necessary by the MP&ECD, including both the site and adjacent land within 300 ft.(91.44m) of the boundaries of the site:

c) a proposed layout plan at a scale of not less than 1:4000, together with block plans at no less than 1:1000, or at such different scales as may be permitted by MP&ECD for large develop such layout plan shall show the locations and dimensions of proposed plots and structures, the locations, widths and grades of streets or other public ways, arrangements for street lighting; and the locations and dimensions of proposed parks, other open spaces, and areas to be set aside for non-residential use, including community facilities with percentages of each;

d) existing sewer, water supply, drainage and other utility lines or facilities:

e) the approximate locations and sizes of proposed water lines, hydrants, sewer lines, storm drainage or other utility lines or facilities, and information regarding their connections with existing or new systems:

f) the proposed construction schedule;

g) any other information if required

3-3.11.4. The layout plan required by regulation 3-3.11.3 (c) and revisions of such layout plan shall be prepared and endorsed by a town planner.

3-3.12 Site Inspections and Consultation

3.3.12.1. The applicant submitting a sub-division plan shall arrange for at least one site inspection by a representative of the concerned Authority or MP&ECD or both, as the case may be;

3-3.12.2. In connection with the submission of application the applicant shall consult with, or obtain information from, appropriate public agencies or companies concerned with the provisions of water supply, sewerage, electricity, telephone service, fire protection and other public services appropriate to the particular development; but the concerned Authority or MP&ECD may in its discretion, assist the applicant to obtain any necessary or desired clearances or commitments regarding such services.

3.3.12.3. Three copies of plan duly signed by Owner and Architect/Town Planner shall be submitted along with the proposal to the concerned Authority for the sub-division of plot.

Schedule 3A – SCRUTINY FEE

1. The Authority shall charge for the scrutiny of building plans and other matters during the disposal of the plan or in phase of its construction a fee to be known as Scrutiny fee.

2. For the purpose of scrutiny fees, total floor area shall include all exempted areas excepting voids.

3. Scrutiny Fee to be charged shall be as prescribed and revised from time to time by the Oversee Committee. The rate shall be made part of these Regulations in the form of an Appendix.

4. The Authority shall charge no Scrutiny Fee in respect of plans for building to be used exclusively for places of religious worship, public sector buildings, educational/vocational building for handicapped persons and building for registered charities.

5. The cost of various shall be determined by the Authority from time to time as per provisions of Ordinance.

SCHEDULE 3B – BUILT UP AREAS IN WHICH GENERAL DEVELOPMENT PERMITS MAY BE GRANTED IN THE ABSENCE OF A DETAILED PLAN.

S.No

Name of Organziation

Name of Area

RESTRICTIVE PROVISIONS

Karachi Metropolitan Corporation

All built up areas under the jurisdiction of KMC except those mentioned in Appendices A to E.

1. Allotment conditions.
2. Lease Agreement.

Cantonments, Ministry of Defence

All built up areas under the jurisdiction of Cantonments except those mentioned in Appendices A to E.

1. Allotment conditions.
2. Lease Agreement.

Sind Industrial Trading Estates

All built up areas under the jurisdiction of SITE.

1. Allotment conditions.
2. Lease Agreement.

Karachi Port Trust

All built up areas under the jurisdiction of KPT.

1. Allotment conditions.
2. Lease Agreement.

Pakistan Western Railways

All built up areas under the jurisdiction of Pakistan Western Railways except those mentioned in Appendices A to E.

1. Allotment conditions.
2. Lease Agreement.

Sind Public Works Department

All built up areas under the jurisdiction of Sind Public Works Department except those mentioned in Appendices A to E.

1. Allotment conditions.
2. Lease Agreement.

Federal Public Works Department

All built up areas under the jurisdiction of Federal Public Works Department except those mentioned in Appendices A to E.

1. Allotment conditions.
2. Lease Agreement.

Board of Revenue

All built up areas under the jurisdiction of Federal Public Works Department except those mentioned in Appendices A to E.

1. Allotment conditions.
2. Lease Agreement.

SCHEDULE 3C – NOTICE FOR CHANGE OF LAND USE

Notice relating to Change of Land Use shall conform to the format provided below.

PUBLIC NOTICE

Change of Land Use of Plot No. _____________ Scheme _______Mr. ____________ owner of Plot No. ___________ has applied to this Office for Change of Land Use of above Plot from ____________ to _______ The City District Government Master Plan and Environmental Control Department is examining the proposed conversion and its implications on the amenities and infrastructure. This conversion will result in the following changes to the currently applicable Lease Conditions and Zoning Regulations.

Conditions

Current

Converted

Total Floor Area

No. of Floors/Height of Building

Compulsory Open Spaces

Parking Requirements

Usage of Building

Anyone having any objections/comments/observations should file the same within 30 days from the date of publication of this notice to the undersigned.
A Public Hearing will then be held at the office of the undersigned within 5 days of the expiry of the above mentioned 30 day period or an extension thereof, and all those having filed objections/comments/observations will be invited to present/explain their point of view. Master Plan & Environmental Control Department decision shall be final.
MP&ECD
CHAPTER 4 – LICENSING/REGISTRATION OF PROFESSIONALS

4.1 Qualifications
The following tables list the requisite qualifications for various categories of professionals and firms.

Architect

A person recognized as such under PCATP Ordinance-ix of 1983 and Rules & Regulations framed there under.

Building Supervisor
Category I

Three years diploma in Civil Engineering or Architecture plus minimum two years experience in Building Construction.

Category II

Three years diploma in Civil Engineering or Architecture plus minimum five years experience in Building Construction.

Category III

Three years diploma in Civil Engineering or Architecture plus minimum ten years experience in Building Construction.

Building Designer

Three years diploma in Civil Engineering or Architecture plus three years practical experience of working as Building Supervisor (no new license shall be issued).

Professional Engineer (Civil)

A person recognized as such under PEC Act and Rules & Regulations framed there under.

Proof Engineer

A person registered with Pakistan Engineering Council (PEC) as Professional Engineer (Civil) and enlisted by the Authority as per clause 4-12.

Structural Engineer

A professional Civil Engineer recognized as Consulting Engineer under PEC Act.

Town Planner

A person recognized as such by PCATP Ordinance-ix of 1983 and Rules & Regulations framed there under.

4-1.2. Qualification/entitlement of firms (as per regulations of PEC).
Constructors registered with the PEC will be registered as Builders by the Authority on production of their PEC registration certificates and the payment of a fee determined and revised by the oversee committee and approved by the Authority.

Geo-Technical Laboratory

Fully equipped laboratory having technical staff as follows:-
Geo-tech consultant, registered with PEC as consultant (Geology or Soil Science). List of all soil testing equipment required.

Soil testing and recommendations for foundations for all types of buildings and projects.

Material Testing Laboratory

Fully equipped laboratory having technical staff as follows:
Registered as Professional Engineer (Civil) with PEC, minimum five years experience in field and technical paper/article on material/soil testing.
Material/Soil Engineer (B.E. Civil) registered as professional Engineer (Civil) with PEC and with minimum five years of experience. List of all Material Testing equipment required.

Material testing of all buildings and projects.

4-2. Manner of Grant of License

4-2.1. Any person and/or firm who holds the qualifications and experiences laid down in these Regulations may apply on a prescribed Form to the Authority for license.

4-2.2. The qualifications and experiences required for license in a particular category wherever required in these Regulations.

4-2.3. When an application for the grant of license has been approved by the Licensing Committee, the applicant will be informed accordingly and will be required to deposit the license fee (Schedule 4A).

4-3. Licensing Committee

4-3.1. The application for grant of license to professional or firm shall be considered by a Committee consisting of:

4-3.1.1. Chief Controller of Buildings – Chairman

4-3.1.2 One nominee each from:
a) Pakistan Council of Architects and Town Planners (PCATP) who has
at least 10 years of experience in design and planning of buildings. – Member
b) Pakistan Engineering Council (PEC) who has at least 10 years of experience in Structural Design of building works. – Member
c) Institute of Engineers Pakistan (IEP) who has at least 10 years of experience in Structural Design of building works. – Member
d) Institute of Architects Pakistan (IAP) who has at least 10 years of experience in design and planning of buildings. – Member
e) Controller of Buildings (Licensing) -Member/Secretary

4-3.2. The Committee shall hold it’s meeting at least every one-month or as and when required.

4-3.2.1. The quorum of this Committee shall be four out of which two must be representatives of Professional Bodies.

4-4. Functions of the Licensing Committee.
4-4.1. The Committee shall decide the cases in the light of these Regulations. It shall also hear the appeals against rejection of licenses.

4-4.2. The Committee shall interview the applicants for grant of license.

4-4.3. The Committee, before approving or rejecting an application, shall also see besides prescribed qualifications and experience, the capability of the applicant.

4.4.4. The Committee at the time of interview for grant of license shall inspect the original documents submitted and may:

4-4.4.1. grant the license, or
4-4.4.2. reject the application, specifying the reasons thereof.

4-4.5. On the recommendation of the Committee, Controller of Buildings (Licensing)/Secretary (Licensing Committee) shall issue license or inform the applicant of the rejection with reasons, as the case may be.

4-4.6. The Committee shall hear the appeals against the orders of suspension of licensee issued by the Chief Controller of Buildings and shall decide the cases.

4-5. Registration & De-Registration

4-5.1. When an application for a license has been approved by the Committee, the license shall be issued to the applicant .

4.5.2. No person shall practice in City District Karachi who is not Licensed by the Authority except the professionals registered with Pakistan Council of Architect & Town Planners (PCATP) and Pakistan Engineering Council (PEC), as Architect, Town Planner and Engineers. The professional employed in public sector shall not be allowed to practice except for the works of their concerned department.
4-5.3. Professionals and or constructors registered/enlisted with the PCATP/PEC will be registered by the Authority on production of their PCATP/PEC registration/enlistment certificates duly revalidated.. However Authority shall have the power to de-register professionals firms and builders (architects, town planners, engineers, de in case of misconduct. A Committee headed by an appointee of the Oversee Committee in which Authority, PCATP, PEC and the building developers are represented, should be formed to decide on such cases. In order to make this operative enclosed schedule should be incorporated.

4-6. Validity period of License
The licenses granted under these Regulations shall be valid for a calendar year ending on 31 December.

4-7. Licence & Renewal Fees
4-7.1. The applicant of a fresh license granted under those Regulations shall pay the fee as prescribed in Schedule 4A. Any fee paid to the Authority shall not be refundable.

4-7.2. The application for renewal of license that has been granted under these Regulations accompanied by such fee as prescribed in Schedule 4A shall be made to the Authority on prescribed form.

4-7.3. If the application for renewal of license has not been submitted within the allowed time, late fee shall be charged in addition to usual fee as prescribed in Schedule 4A.

4-8. Revocation of License
Without prejudice to any other action that may be authorized under the Ordinance or the rules framed there under the Authority may revoke or suspend the license of a Licensee/firm etc. after issuance of show cause notice and, if the licensee fails to satisfy the Authority in respect of the violation of these regulations as allegedly committed by him from the Authority.

4-9. Appeal against the Decision of Licensing Committee
4-9.1. Any person aggrieved by an order of the Authority under these Regulations or against the decision of the licensing committee may refer an appeal to the Oversee Committee for review of the decision. The decision so made shall be final.

4-9.2. The period of limitation for filing such appeal under these regulations shall be 90 days from the date of receipt of cause for such grievances.

4-10. Reasons for Cancellation/Suspension of License
4-10.1. The licensee disobeys or fails to comply with any Regulations or directions issued by the Authority from time to time or any rule framed under the Ordinance amended up-to-date and the provisions of these Regulations.
4-10.2. The licensee in case of individual or in case of registered company, its directors/partners, shall personally and severally be held responsible for the breach of any provision of the Ordinance amended up-to-date, and rules and regulations framed there under.

4-10.3. The licensee executes and supervises any unauthorized work or any work which is being raised in the absence of a Development Permit, or is not in accordance with the specifications, plans, design and drawings approved by the Authority except with allowable variations as given in these Regulations and allowed under Engineering codes.

4-10.4. The licensee disturbs, defies or breaks the discipline of any office of the Authority.

4-10.5. The licensee willfully obstructs the officers of the Authority in carrying out their duties, fails to provide facilities for inspecting the building/site and refuses to furnish the required information from time to time.

4-10.6. The licensee fails to comply with these Regulations.

4-107. The licensee willfully misrepresents any fact or makes any false statement to the Authority or suppresses information of any material fact relating to the work for which he has been engaged.

4-11. Period of Suspension
The license of the Licensee shall be suspended until the rectification of the cause of suspension or for maximum period as given below:

4-11.1. First time suspension six months.

4-11.2. Second time suspension one year.

4-11.3. In case the license violates the terms and conditions, as per these Regulations for the third time the license shall stand cancelled.

4-12. Committee for Enlistment of Proof Engineers

4-12.1. Chief Controller of Buildings – Chairman

4-12.2. One nominee each from:

4-12.2.1. Pakistan Council of Architects and Town Planners (PCATP) who has at least 15 years of practical experience in the
professional field. – Member

4-12.2.2. Pakistan Engineering Council (PEC) who has at least 15 years of practical experience in Structural design
of building works. – Member

4-12.2.3. Institution of Engineers (IEP) who has at least 15 years of practical experience in structural design of building works.
- Member
4-12.2.4. Controller of Buildings (Structure) – Secretary

Quorum of this Committee shall be three out of which two must be representatives of Professional Bodies.

SCHEDULE 4A – REGISTRATION/LICENSING FEES

These fees may be revised subject to the approval of Oversee Committee formed under Ordinance.

Table 1. Fees for Registration/renewal of Builder/Developer Registration.

1

Fees for Builder Registration

Rs. 30,000/-

2

Renewal of Builders/Developers Registration

20% of the fees for registration

3

Registration fees for Builders/Developers Registration

Original Fee

Note: If license/registration was not renewed for three consecutive years then the license shall be deemed to be cancelled and new application would be required.

Table 2. Fees for grant/renewal of License to Firms (Soil/Material testing laboratories)

I

Fees for granting license to firm

Rs. 7,500/-

II

Renewal of firm’s license

20% of the fees for granting license

III

Registration fees for firm’s license

Original License Fee

Note: If license is not renewed for three consecutive years, then the license shall be deemed to be cancelled and new application would be required.

SCHEDULE 4A – REGISTRATION/LICENSING FEES CONT/2

table 3. Fees for registration/renewal of Professional Registration.

I

License/registration fee

Rs. 500/-

II

Renewal fee

Rs. 250/-

III

Restoration fees

Rs. 500/-

Note: If registration is not renewed for three consecutive years then it shall be deemed to be cancelled and new registration/licensing would be required.

CHAPTER 5 – PUBLIC SALE PROJECTS

5.1 No objection certificates for sale of units in buildings.
5-1.1. Application for NOC
A developer applying for NOC to the Authority shall furnish the requisite documents and particulars in Form (DNP-1) as appended to these Regulations, duly signed by all concerned.

5-1.2. Contractor All Risk Insurance Policy
The Developer shall also submit Contractor All Risk Insurance Policy (CAR Insurance Policy) from the Insurance Companies approved by the Authority in respect of the project under clause 12(7) of Ordinance. The said CAR Insurance Policy shall also cover the losses arising out of defects in design or due to earthquake and shall be valid upto 12 months of maintenance period after issuance of Occupancy Certificate or physical handing over of possession which ever is later.

5-1.3. Undertaking of the Developer/Builder/Professional
The Developers, his builder and his Architect/Engineers shall submit the undertaking along with the Form DNP-1. The undertaking of the Developer shall be on stamp paper in accordance with format specified in Form DNP-1, (Annexure l) while the builder shall submit undertaking in accordance with the format specified in Form DNP-1, Annexure-2.

The undertaking of Architect/Engineer shall be in accordance with the format as provided in ZP-2 form.

5-1.4. Determination of Price and Cost Estimate.
A developer shall submit the Selling Price of various units for registration purposes with details specification and work program for the project as specified in Form DNP-l Annexure (3) & (4) respectively.

This price shall be quoted in all the advertisement and promotion literature published by the developer, no escalation in the cost shall be allowed except where inflation (as defined by the Ministry of Finance) is above double digit for particular year in such case excess over the double digits shall be the percentage of price increase. In this case the developer shall simply inform the Authority, along with relevant inflation, figure. No escalation shall be granted to the developer who has failed to complete the project in time.

5-1.5. Fee for NOC
A Developer shall pay to the Authority a fee for the “NO OBJECTION CERTIFICATE FOR SALE” as per the provision of Ordinance. Authority to publish a notice on the salient features of each public sale project (name of project, address builder, office address architect/engineers, No. of floors, No. and sizes of shops/flats/offices, compulsory open spaces, date of completion model agreement, etc.) within seven days of issuance of “NOC for Sale”.

5-1.6. Security Deposit.
5-1.6.1. The Developer shall deposit cash security deposit or a bank guarantee equivalent to 2% of the cost of project with the Authority to be held in a Corporate account which shall be utilized as defined in Clause 5-1.6.3: In addition, in case of delay in completion of the project, where such delay has not been condoned as per clause 5-1.18., deduction from the security shall be made in proportion to the extent of the delay. This amount or lesser amount shall be refunded on the, successful completion of the project and after obtaining the Occupancy/Completion Certificate and the expiry of the maintenance period as enunciated in the NOC granted by the Authority. .

5-1.6.2. The 2% security deposit will be paid in four (4) equal installments as under:
i) At the time of collection of the NOC for sale.
ii) On the approval but before collection of plinth certificate.
iii) On the completion of the casting of roof stab/building or the commencement of internal plaster, whichever is earlier.
iv) On the commencement of the internal development works of the project.

5.1.6.3 Authority shall have the right to utilize the Security Deposit to remedy any fault/defect in the construction of the building after receiving complaints/notice and if the developer fails to rectify the same by himself or violation of any condition of the NOC granted by the Authority that come to light at the time of the completion of the project or in case the builder/developer fails to comply with any of the following:-

a) to construct the building in accordance with the design specifications agreed with the purchaser and approved by the Authority;
b) to complete the building in time as per terms of agreement with the purchaser and/or as provided in these Regulations or Ordinance amended up-to -date;

c) To provide services as per agreement with purchaser;

d) To obtain Occupancy Certificate from the Authority.

e) If Developer is found to be indulging in or involved in any unlawful activities pertaining to the project.

f) To rectify defects after occupation, if the Developer fails to act, as per Clause 5-1.8.4. (provided the Authority is satisfied that the Developer is at fault) and that such a matter has not arisen due to misuse, mischief of the allottees and is subject to normal wear & tear.

5-1.6.4 Any such defect or violation shall have to be made good by the Developer at their own cost and risk and the cash security deposit, shall not absolve the Builder/Developer of his responsibility to the project as per condition of NOC and the agreement made with the allottee or as enunciated in clause No.5-1.7.4.

5-1.6.5 This security deposit shall not in any way, prejudice the Authority’s rights under these Regulations to initiate any other proceedings or action in the event of violation of any of these Regulations.

5-1.6.6 – The deposit shall be released to the Developer after one year of obtaining Occupancy Certificate but after meeting all Developer’s liabilities as cleared by the Committee defined in Clause 5-1.27.

5.1.7. Application Form for Allotment.
After the receipt of No Objection Certificate from the Authority the Developer shall get filled an application form specified as Form DNP-1
Annexure-5, from a person intending to book a unit in the project.

5-1.8. Execution of Sub-lease.
A unit shall be offered for sale on cash/cash-cum-loan basis as per Schedule of Payment described in Form DNP-1 Annexure-6. Sub-lease shall be executed as per sale and allotment conditions, in favour of allottee, before delivering the possession of the unit. The allottee shall own the building structure of his unit and, shall, proportionately share the price/rent of land of the unit with allottees of the project.

5-1.9. Confirmation of Allotment.
The allocation of the unit shall be confirmed by the Developer through an Allotment letter to the allottees as specified in Form DNP-1 Annexure-7, within 15 days of booking. The allotment letter shall specify the unit number, floor, floor, area of the unit, general facilities, fittings and fixtures with their make and material, the total price of the unit and details of other charges together with the key plan of unit in line with key plan approved by the Authority at the time of NOC.

5.1.10. Agreement with Allottee
Within 15 days of the issuance of allotment letter before calling other installments in respect of the unit the Developer shall in pursuance of Clause 12 (4) of the Ordinance, execute an Agreement with the allottees as specified in Form DNP-3.

5-1.11. Payment of Installment
5-1.11.1. The payment of installments shall be made by the allottee strictly according to the Schedule of Payment (Form DNP-1 Annexure 6) attached to the agreement. In case of failure a 15 days notice shall be issued by Registered A/D or registered courier service on the last given address and if the allottee fails to make payment within the above period, another notice shall be issued by the Developer extending the period up to another 30 days. In case of further failure, a cancellation letter shall be issued to the allottee, a copy of which shall be endorsed to the Authority. The Developer shall not rebook the cancelled unit within 30 days of receipt of copy of cancellation letter by the Authority, provided that Developer shall publish the cancellation notice in the weekend addition of two leading newspapers (English & Urdu) in the classified advertisement section in a bold format under the heading of cancellation of flat/unit.

5-1.11.2. In response to the above cancellation notice, if the allottee intends to continue the booking, the Developer shall restore the allotment, after receipt of pending payment and charging the mark-up on the prevailing Bank rate for the period of delay on unpaid installment.

5-1.11.3. If no response to the Authority is received from the allottee during the said period, the cancellation of the- unit shall be confirmed automatically. In case the cancellation is made before allocation, the Developer shall refund the total amount paid till that time by the allottee within 30 days. However, after allotment of unit, 4% of the amount paid that far shall be retained by the Developer, and the rest of the amount shall be refunded within 30 days.

5-1.11.4. In spite of failure to make payment of installments in time, if the Developer, does not resort to cancellation as provided in these Regulations, the Developer may or may not charge markup on the unpaid installments at the prevailing bank rate and the allottee shall be informed accordingly.

5.1.12. Loan Component

5-1.12.1. The Developer may arrange the availability of loan, if the project proposed contains a loan component as mentioned in the Schedule of Payment (Form Annexure-6).

If the loan is refused or reduced due to any reason whatsoever by the loan giving agency, the allottee shall pay the loan amount from his own resources. However extra time of at least six months shall be given to allottee to pay the loan component to the developer.

5-1.12.2. The allottee must complete all documentation for lease and loan within 120 days of booking as written in the agreement and a reminder shall be issued by the Developer: The repayment of the loan installments shall be made by the allottee/borrower to the loaning agency as and when it falls due as per rules of the relevant agency. The allottee/borrower will abide by the arrangements of loan and will follow rules and regulations and orders and instructions of the loaning agency.

5-1.13.Documentation and Connection & Meter Charges
Documentation charges for sub-lease and loan, and external service connection charges for gas, electricity, sewage and water shall be paid in proportion to the unit area in accordance with the actual payment made to these agencies plus 15% as service charges for their respective services. This amount should be paid at the time of deposit of challan. In case any allottee fails to make this payment he shall pay mark up on the amount at the prevailing Bank rate.

5-1.14. Minor Changes
The building shall be constructed by the Developer strictly according to the approved building plans and specifications. However minor changes, if any, within the unit in plan or p may. be made by mutual arrangement between Developer and allottee subject to the conditions that these do not contravene any of the Regulations and provided that such changes do not effect the structural stability of the building and do not usurp the right of the other allottees.

5-1.15. Clearance of Dues for Execution of Sub-lease
The sub-lease of the unit shall be executed in favour of the allottee before handing over the possession of the unit, provided the allottee has made payment of outstanding amount up to that time.

5-l.l6. Timely Completion of the Project
The Developer shall maintain steady progress of work irrespective of the situation of payment by the individual allottees and availability of loan by the- loan-giving agency. The Developer shall, if needed, fulfill the obligation of the timely completion of the project by arranging the deficit finances from his own resources. The Developer shall inform the allottees every three months regarding progress of the project.

5-1.17. Withdrawal of Allotment
The allottee if he/she so wishes can withdraw his/her allotment of the unit by surrendering the original letter of allocation/allotment to the company and in this event the Developer will refund to the allottee the amount deposited till that time. In case the cancellation is made before allotment the Developer shall refund total amount paid by the allottee till cancellation within 30 days. However, after the allotment of unit 4% of the amount paid that far, for the unit, shall be retained by the Developer and the rest of the amount shall be refunded within 30 days.

5-1.18. Extension in Date of Completion
Extension in Date of Completion shall be allowed to a developer if he produces documentary proof that more than 50% of his clients have defaulted in payments of 2 or more installments for over 6 months period. The developer shall also submit consent of at-least 50% of the allottees while applying for the extension in time prescribed in form DNP (5).

5-1.19. Sublet & Transfers of Allotment
The allottee can sublet/transfer or sell his unit to any one, with prior written permission of the Builder/Developer, who shall allow transfer on receipt of all outstanding dues up to that time and transfer fee of 0.5% of total price of unit However, no transfer fees shall be charged in case the transfer is made within 3 months of allotment.

5-1.20 Physical Possession and Care taking Charges

5-1.20.1. The Developer shall, after obtaining Occupancy Certificate from the Authority, which shall include the provision of electric, gas, water and sewerage services, issue intimation letters to the allottees. The allottee shall take over possession of the unit within 30 days of receipt of such letter from the builder. In case of delay the Developer shall charge per month as specified in the agreement from the allottee for care taking of the unit in good condition.

5-1.20.2. In case of occupancy/completion certificate is issued by the Authority on the basis of clause No.3-2.15.3. The operation and maintenance of generator will be in a manner that 30% will be born by the builder and 60% by the occupied units and 10% by the unoccupied units this arrangement is seized after the commissioning the utilities by the utilities agencies.

5-1.21. Delay in Completion and Compensation for period of Delay
The Builder/Developer shall complete the project and hand over physical
possession of the unit complete in all respect to the allottee by the time specified by the Authority. In case of delay in handing over possession the Developer shall pay mark-up to the allottee at the rate of prevailing banks rate on the total amount paid, for the period of delay calculated from the completion time specified by the Authority or extension made thereof.

5-1.22. Abandonment of the Project
If, for any reason, the project is abandoned by the Developer, the Developer will refund the total amount received from the purchaser with mark up at the prevailing bank rate on the same, for the whole periods of retention of the money, along with an additional compensatory amount equal to 10% of the amount received from the allottee up-to-date against the booked unit, within 60 days of the announcement to the effect of the abandonment of the project.

5-1.23. Defect Liability
The Developer shall assume Defect Liability of the unit for a period of 12 months in respect of structure and six months in respect fixture from the date of offering possession of the unit after obtaining Occupancy Certificate, and all defects shall be rectified to the satisfaction of the allottee as per provisions of the Ordinance amended as amended from time to time.

5-1.24. Sale or Transfer of the Project
No Developer shall sell or transfer the whole project to any one for sale or transfer the units of the project to the general public, unless prior intimation to the Authority is given and No Objection from the 2/3rd majority of the allottees is obtained. The new Developer shall assume all responsibility and liabilities of the agreement made between outgoing Developer and allottees, in addition the new builder/developer must get the previous NOC issued by the Authority revised/revalidated in his favour.

5-1.25. Formation of Association & Maintenance of Utilities
The maintenance of the services and amenities at the project will be finally looked after by the allottees who would form an Association to handle the affairs of the project. The rights of easement, appurtenances and other common rights shall be transferred to such Association/Society.

5-1.26. Settlement of Disputes
All disputes of the Builder/Developer and allottee shall be referred to the Authority. Any appeal against the decision made by the authorized officer of the Authority may be filed before the Chief Controller of Buildings and thereafter any further appeal all be made to an Appeal Committee consisting of the Chief Executive of the Authority, Chairman PEC or his representative. Chairman PCATP or his representative, one representative of Association of Builders & Developers (ABAD) and the representative of concerned Authority. The decision of this Committee shall be final and irrevocable.

5-1.27. Instructions of the Authority
Besides the above Regulations, the orders and instructions of the Authority in accordance with these Regulations issued from time to time in this regard shall be followed strictly.

5-2. NO OBJECTION CERTIFICATE FOR SALE OF PLOTS IN PUBLIC SALE PROJECTS

5-2.1. Application Form
An Owner/Developer applying for NOC to the Authority shall furnish the requisite documents and particulars in Form (DNP-2) as appended to these Regulations duly signed by all concerned.

5-2.2. Undertakings of Developer/Builder and Professional
The Developers, his builder and his Architect/Engineer shall submit the undertaking along with the Form DNP-2. The undertaking of the Developer shall be on stamp paper in accordance with format specified in Form DNP 2, Annexure (8) while the builder shall submit undertaking in accordance with the format specified in Form DNP-1. Annexure-9.

The undertaking of Architect/Engineer shall he in accordance with the format as provided in ZP-3 form.

5-2.3. Price and Work Programme
A Developer shall also submit the selling price of various plots, clearly specifying the development cost of water supply sewerage and roads.

5-2.4 Fee for NOC
A Developer shall pay to the Authority a fee for the ‘NO OBJECTION CERTIFICATE FOR SALE as per procedure prescribed in the Ordinance. Authority to publish a notice on the salient features, of each public sale project (name of project, address, builder, office address town planner number and sizes of various types of plot, date of completion, model agreement. etc.) within seven days of issuance of ‘NOC for Sale.”

5-2.5. Security Deposit
5-2.5.1. The Developer, shall deposit cash security deposit equivalent to 2% of the cost of the development work of the project with the Authority to be held in a separate account which shall only be utilized as defined in Clause 5-2.5.3. This amount or lessor amount shall be refunded on the successful completion of the project and after obtaining the Occupancy/Completion Certificate and the expiry of the maintenance period as enunciated in NOC granted by the Authority.

5-2.5.2. The 2% security deposit will be paid in four (4) equal Installments as under:
i) At the time of collection of the NOC for sale.
ii) On the commencement of demarcation work at site.
iii) On the completion of sewerage & water supply system.
iv) On the commencement of carpeting of the roads.

5-2.5.3. Authority shall have the right to utilize the Security Deposit to remedy any fault/defect in the development works or violation of any condition of the NOC granted by the Authority that come to light at the time of the completion of the project or in case the builder/developer fails to comply with any of the following:-
a) to develop the township in accordance with the design specifications agreed with the purchaser and approved by the Authority,
b) to complete the development on time as per terms of agreement with the purchaser and/or as provided in these Regulations or Ordinance amended up-to-date;
c) to provide services as per agreement with purchaser:
d) to obtain Occupancy Certificate from the Authority;
e) If Developer is found to be indulging in or involved in any un lawful development/construction activities pertaining to the project.
f) to rectify defects after occupation if the Developer failed to act as per Clause 5-2.5.4, provided the Authority is satisfied that the Developer is at fault and that such a matter has not arises due to misuse, mischief or subject to normal wear & tear.

5-2.5.4. Any such defect or violation shall have to be made good by the Developer at their own cost and risk and the cash security deposit, shall not absolve the Builder/Developer of his responsibility to the project as per condition of NOC and the agreement made with the allottee or as enunciated in clause No.5-2.5.4.

5-2.5.5 This security deposit shall not, in any way, prejudice the Authority’s rights under these Regulations to initiate any other proceedings including prosecution or any other action in the event of violation of any of these Regulations.

5-2.5.6 The deposit shall be released to the Developer after one year or obtaining Occupancy Certificate but after meeting all Developer’s liabilities as cleared by the Committee defined in Clause 5-2.26.

5-2.6. Application Form for Allotment
After the receipt of No Objection Certificate from the Authority, the Developer shall get filled an application form specified as Form DNP-2 Annexure-12, from a person intending to book a plot in the project together with the allotment letter, the allottee shall be provided not only the site plan of his allotted plot but also and invariably an approved layout plan of the entire scheme showing the location and area of his plot together with location and list of all amenity plots with their dimensions and area.
5-2.7. Execution of Sub-Lease
A plot shall be offered for sale as per schedule of payment described in Form DNP-2 Annexure-13 and by virtue of sale, lease shall be executed, as per sale or lease conditions by the Developer in favour of allottee before delivering the possession of the plot.

5-2.8. Price of the plot
5-2.8.1 The price of the plot shall not be Increased or escalated by the Developer without approval of the Authority under Clause 13(1) of the Ordinance. The Developer while fixing the price of plot shall take into account the escalation anticipated during the declared development period. The grant of any extension in the. time of completion of the development by the Authority shall not entitle the builder to any escalation of cost over the initially fixed cost n the plot.

5-2.8.2. If the allottee refuse to agree with the escalation in price granted by the Authority, the Developer shall refund the amount deposited along with the mark-up at the prevailing rate of profit of the average of three Scheduled Banks for the period extending for the date of first payment by the allottee to the date of refund by a Developer. This amount shall be paid within 60 days as per banking principle.

5-2.9. Confirmation of Allotment
The allocation of the plot shall be confirmed by the developer through an Allotment Letter to the allottee as specified in Form DNP-2 Annexure-14 within 15 days of booking. The allotment letter shall specify the Plot Number, Sector or Block, general facilities, the total price of the plot and details of other charges. If the allotment letter is not given within 15 days than the developer shall pay mark-up to the allottees at the prevailing bank rate.

5-2.10.Agreement between Developer and Allottee
Within 15 days of the issuance of allotment letter and before calling, other installments in respect of the plot, the Developer shall, in pursuance of Clause 5(4) of the Ordinance, execute an Agreement with the allottees as specified in form DNP-4 in case of the failure of the developer in this effect the developer shall pay the mark-up to the allottee at the prevailing bank rate in addition.

5.2.11 Payment of Installment

5-2.11.1. The payment of installments shall be made by the allottee strictly according to the Schedule of Payment (Form DNP-2 Annexure-13) attached to the Agreement. In case of failure, a 15 days notice shall be issued by Registered AD or registered courier service on the last given address and if the allottee fails to make payment within the above period, another notice shall be issued by the Developer extending the period up to another 30 days. In case of further failure, a cancellation letter shall be issued to the allottee, a copy of which shall be endorsed to the Authority. The Developer shall not rebook the cancelled plot within 30 days of receipt of copy of cancellation letter by the Authority, provided further that the Owner/Developer shall publish the cancellation notice in the weekend addition of two leading newspapers (English & Urdu) in the classified advertisement section in a bold format under the heading of cancellation of plot.

5-2.11.2. If, in response to the above cancellation notice the allottee intends to continue the booking, the Developer shall restore the allotment, after receipt of pending payment a charging the mark-up on the prevailing Bank rate for the period of delay on unpaid installment.

5-2.11.3. If no response to the Authority is received from the allottee during the said period, the cancellation of the plot shall be confirmed automatically. In case the cancellation is made be before allocation, the Developer shall refund the total amount paid till that time by the allottee within 30 days. However, after allotment of plot 4% of the amount paid that far shall be retained by the Developer, and the rest of the amount shall be refunded within 30 days. In spite of failure to make payment of installments in time, if the Developer does not resort to cancellation as provided in these Regulations he may or may not charge mark-up on the unpaid installments at the prevailing Bank rate. If the amount is not refunded with in 30 days the developer shall pay the mark-up to the allottee at the prevailing bank rate.

5-2.12. Documentation, Connection and Meter Charges
Documentation charges for sub-lease and loan, and external service connection charges for sewage and water shall be paid in proportion to the area of the plot, in accordance with the actual payment made to these agencies plus 15% as service charges for their respective services. This amount is to be paid at the time of deposit of challan. In case allottee fails to make this payment he shall pay mark-up on t at the prevailing Bank rate, for the period of the delay.

5-2.13. Clearance of Dues for Execution of Sub-Lease
The sub-lease of the plot shall be executed in favour of the allottee before handing over the possession of the plot provided the allottee has made payment of all outstanding amounts due up to that time:

5.2.14. Timely Completion of the Project
The Developer shall maintain steady progress of work irrespective of the situation of payment by the individual allottees and fulfill the obligation of the timely completion of the project even by arranging the required funds from his own resources.

5-2.15. Withdrawal of Allotment
The allottee if he/she so wishes can withdraw his/her allotment of the plot by surrendering the original letter of allocation/allotment to the Developer and in this event the Developer will refund to the allottee the am deposited till that time. In case the cancellation is made before and the Developer shall refund total amount paid by the allottee till cancellation within 30 days. However, after the allotment of plot, 4% of the amount paid that for, for the plot shall be retained by the Developer and the rest of the amount shall be refunded within 30 days.

5-2.16.Extension in Date of Completion
For extension of date of completion of the project, the Developer shall invite “No Objection” through display advertisement of two leading circulated newspapers in Urdu and English. A prescribed fee in this regard shall be paid by the Developer (Schedule 4A), before extension is granted by the Authority.

5-2.17. Sublet & Transfer of Allotment
The allottee can sub-let, transfer or sell his plot to any one before taking over possession, with prior written permission of the Developer, who shall allow such transfer on receipt of all outstanding dues up to that time and a transfer fee @0.5% of the total price of plot. However, no transfer fees shall be charged in case the transfer is made within 3 months of allotment.

5-2.18. Physical Possession & Care taking Charges
The Developer, after obtaining Completion Certificate from the Authority which shall include the provision of Water and Sewerage Services, shall issue intimation to the allottee. The allottee shall take over possession of the plot within 15 days of receipt of such letter from the Developer. In case of delay the Developer shall charge an amount as specified in agreement per month from the allottee for care taking of the plot in good condition.

5-2.19. Delay in Completion and Compensation for period of delay
The Developer shall complete the project and, after obtaining Completion Certificate, hand over physical possession of the plot complete in all respect to the allottee, by the time specified by the Authority. In case of delay in handing over the possession, the Developer shall pay mark-up to the allottee at prevailing Bank rate on the total amount paid, for the period of delay, from the time specified or extension made thereof by the

5-2.20. Development of Scheme
The Developer shall develop the area by providing water supply system, sewage disposal system, storm water drainage system, roads and walkways, refuse collect on depots, and parks and play grounds. The Developer shall initiate the process for the arrangement of bulk supply of electricity and gas for the concerned development scheme/area.

5-2.21 Abandonment of the Project
If, for any reason, the project is abandoned by the Developer, the Developer will refund the total amount received from the purchaser with mark up at the prevailing bank rate for the same, for the whole period of retention of the money, along with an additional compensatory amount equal to 5% of the amount received from the allottee up-to-date against the booked plot, within 60 days of the announcement to the effect of the abandonment of the project.
5-2.22. Defect Liability
The Developer shall assume Defect Liability of the plot and external services provided for a period of 12 months- from the date of offering possession of the plot after obtaining Completion Certificate, and all defects shall be rectified to the satisfaction of the Authority as per provision of Ordinance as amended from time to time.

5-2.23. Use of Amenity Spaces
Amenity spaces in the project shall neither be converted nor mis-utilized but will be used exclusively for the benefits of the residents of the project as per approved Master/Layout Plan.

5-2.23.1. The Developer shall ensure the development of all amenity plots by the time 50% of the cost of the allotted plots have been received from the allottee before demanding any further plot from the allottee. Development of the amenity plot shall be certified by the Authority before allowing the developer to demand any further installment/payment.

5-2.24. Formation of Association for Maintenance of Utilities & Environment
The maintenance of the services and amenities at the project will be finally looked after by the allottees who would form an Association to handle the affairs of the project. The rights of easement, appurtenances and other common rights shall be transferred to such Association/Society.

5-2.25. Sale or Transfer of the Project
No Developer shall sell or transfer the whole project to any one for sale of transfer the plots of the project if any to the general public unless prior intimation to the Authority is given and No Objection from the 2/3d of allottees is obtained. The new Developer shall obtain revised/revalidated NOC from the Authority in his favour before taking the work of development in hand or offering for sale the remaining numbers of plots to the general public. In addition, the new Developer shall assume all responsibility and liabilities of the agreement made between outgoing Developer and allottees.

5-2.26. Settlement of Disputes
All disputes of the Developer and allottee shall be referred to the Authority. Any appeal against the decision made by the authorized officer of the Authority may be filed before the Chief Controller of Buildings and thereafter any further appeal shall be made to an Appeal Committee consisting of the Chief Executive of the Authority. Chairman PEC or his representative, Chairman PCATP or his representative, one representative of Association of Builders & Developers (ABAD) and the representative of the concerned Authority. The decision of this Committee shall be final and irrevocable.

5.2.27. Instructions of the Authority
Besides the above regulations, the orders and instructions of the Authority is from time to time in this regard as per the Regulations shall be followed strictly.

CHAPTER 6 – VIOLATIONS OF LAND DEVELOPMENT

6-1. Removal or Prevention of Violation.
6-1.1 The Authority and each Concerned Authority shall carry out inspection and take other appropriate measures to ensure compliance with these Regulations.

6-1.2 If the Authority/Concerned Authority shall find that any of the provisions of these Regulations, or any rules relating thereto, or any conditions of a General or Special Development Permit, are being or have been violated, it shall serve a notice in writing on any person responsible for the violation

6-1.2.1 The notice that indicate the nature of the violation and the Authority/Concerned Authority may order such action as it may deem appropriate to correct the violation including but not limited to:

a) The discontinuance of any illegal work being done on, or activities being conducted in relation to, land:

b) Requiring the Owner/Professional who are carrying out or have carried out such building works on or before such day as shall be specified in such notice by a statement in writing subscribed by him or by an agent duly authorized by him and addressed to the Authority, to show sufficient cause why such building works or such part thereof shall not be removed or altered to comply with these Regulations;

c) If such person fails to show sufficient c to the satisfaction of the concerned Authority such building works or part thereof shall not be removed or altered, the concerned Authority may take the following actions:

i) require the person who has carried out the works against the provisions of these Regulations or any other statute, to alter or cessation the whole or part of development works thereof;

ii) any other measures authorized by these Regulations, or with the conditions of development permit.

6-1.2.2 The order shall specify the period within which the violation shall be corrected and in the event of non-compliance with the order the Authority/Concerned Authority may itself cause appropriate measures under the relevant statute to be taken to effect compliance. The expenses shall be recoverable from the owner or owners in the manner provided for the recovery of arrears of land revenues or taxes.

6-1.2.3. The giving of notice and making and serving of an order under this clause shall not be a prerequisite to the initiation of, and shall not bar, any prosecution under any applicable Law, and the Authority/Concerned Authority may take action under this clause whether or not a prosecution has been initiated.

6-2. Enforcement by MP&ECD.
MP&ECD may direct the Concerned Authority (under whose jurisdiction violation/s occur) to take action under Regulation 1-4 with respect to any violation

6-3. Appeals
6-3.1. Within 30 days from the date of receipt of any order of an Authority/Concerned Authority/MP&ECD under these Regulations, any aggrieved person so served may appeal to the Authority/Concerned Authority/MP&ECD as the case may be, which shall give him an opportunity to be heard before such officer within 15 days of filing such appeal.

6-3.2. Within 30 days from the date of receipt of any order of Authority/Concerned Authority/MP&ECD under these Regulations or of its determination on an appeal under the preceding sub-clause, the aggrieved person, so served may appeal to the Government which shall give him an opportunity to be heard before such officer or committee and within such reasonable time as shall be designated by the Government.

6-3.2.1 Authority/Concerned, Authority/MP&ECD or the Government, as the case may be, after considering a report and any recommendations of the hearing officer or officers may affirm, modify or over-rule the order or determination.

6-4. Finality of Orders or Determinations
Unless an appeal has been admitted as provided by Clause 6-3 of above, an original or appellate order, or determination of the Authority/Concerned Authority/MP&ECD or the Government shall be final.

CHAPTER 7 – DANGEROUS BUILDINGS

7-1. General
For the purposes of this chapter all such buildings, walls or structures which are declared by the Technical Committee on Dangerous Buildings as dangerous shall lie in the following two categories:

7-1.1. Any Building or structure whose strength, stability, serviceability, robustness and/or durability has been impaired due to any reason such as improper structural design and detailing, faulty and/or poor construction, decay. dilapidation, obsolescence, natural disasters or leading to abandonment due to all these reasons to a level, where it c not be restored to its original status, shall classify as Dangerous Building Category-I, and shall liable to be demolished.

7-1.2. Any building or structure or part thereof whose strength stability robustness, serviceability and/or durability has been impaired due to all such reasons as cited in 7.1.1 to a level where it could by way of strengthening re-strengthening, appraisal and restoration be brought partially or wholly near to its original status, shall be classified as Dangerous Building Category-2, and shall be governed by the Regulation No.7-4 set forth in these regulations.

7-2. Technical Committee on Dangerous Buildings (TCDB).
7-2.1. The Controller of Buildings of the concerned Circle of the Authority shall examine, or cause to examine, every building or structure or portion thereof in his Circle reported as dangerous, and shall refer the matter to the Technical Committee specially constituted by the Authority for a term of office not more than three years. The committee shall be reconstituted after every ten years.

7-2.1.l. A nominee of Pakistan Engineering Council who has at least 15 years of practical experience in the field of Structural Engineering.

7-2.1.2. A nominee of Pakistan Council of Architects & Town Planners, who has at least 15 years of practical experience in the professional field.

7-2.1.3. A nominee of K.M.C. not less than the rank of Chief Engineer with experience in the relevant field.

7-2.1.4. A nominee of KDA not less than the rank of Superintending Engineer with experience in the relevant field.

7-2.1.5. A nominee of Department of Heritage

7-2.1.6. COB (Dangerous Buildings), Member/Secretary of the Committee.

7.2.1.7. In addition to the above, the committee (TCDB) may co-opt experts for specific purposes as and when required. The Committee shall operate under the rules of business, as framed and approved by the Committee in its first meeting.

7-2 2. If in the opinion of COB of the concerned Circle, a building or part thereof has become dangerous for human habitation he shall give at least twenty-four hours (24 hrs) notice to the owner/owners or occupants (who need not to be named) for inspection of such buildings by the Technical Committee (TCDB).

7-2.3. In case the Technical Committee (TCDB) considers a building or a part thereof repairable or modifiable without causing danger to human life or property, it may issue such orders to the owner/occupant/tenant of such building in this regard.

7-2.4. If the above Technical Committee finds such building dangerous/ ruinous/unsafe after proper inspection and investigation. Controller of Buildings of the concerned C shall serve to the -owner of such building or structure a written notice stating the defects thereof as determined by the TCDB and shall require the owner or person in-charge of the building or premises to commence either the required repairs or improvements, or demolition and removal of the building or structural portion thereof as the case may be, and all such works shall be commence/completed within the period specified by the Committee (TCDB).

7-3. Buildings Unfit for Human Habitation and Notice of Prohibition
7-3.1. If for any reason it shall appear to the Authority that any building or part thereof intended or used for human habitation or human occupation for any purpose whatsoever is unfit for such uses, it shall signify its intention to prohibit the further use of such building or part of a building and call upon the owner or occupiers/tenants, to state in writing their objections (if any), to such prohibition within fifteen (15) days after the receipt of such notice. If no objection is raised by such owner or occupier within the prescribed period or if any objection which is raised appears to the Authority, to be invalid or insufficient, the Authority may prohibit by an order in writing the further use of such building or part thereof and immediately inform the Committee (TCDB) for further necessary action. The owner or occupier of the building shall be given an opportunity of appearing before Authority in person or by an agent in support of his objection, if he so desires.

7-3.2. Notice of such prohibition shall be served in person or by any courier service, mail, or the pasting at site in presence of authorized officer of Authority upon the building or part of the building affected thereby and also upon every occupied portion thereof (wherein the occupant need not to be named), stating the fact of such prohibition and appointing a day (not being more than fourteen (14) days after the date of such notice) before which every such person shall remove himself and his property from the said building or part thereof and if on the day so appointed such person has failed to remove himself and his property as aforesaid, the Authority may cause him and his property to be removed at his own risk and cost. In case of imminent danger, 24 hours notice may be issued by the Authority.

7-3.3. When a building or part of a building has been vacated under Clause 7 the Authority shall cause to be displayed at each entrance at prominent places to such building a notice to read “DO NOT INTER UNSAFE TO OCCUPY” in English & Urdu and no person except with the permission in writing of the Authority and in accordance with the terms and conditions of such permission shall enter into or remain in such building or part thereof. Such notice shall remain displayed until the required repairs, demolition, or removal are completed. Such notice shall not be removed without written permission of the Authority.

7-4. Alteration/Modification/Updates and Repairs of Dangerous Buildings of Category-2.

7-4.1. At any time after a building or part of a building has been vacated under Clause 7-3.2 if the Committee (TCDB) considers that it can be rendered fit for human habitation by the structural alterations/repairs of modification/updates or repairs before or after the vacation of habitants from such buildings, the Committee (TCDB) may by notice in writing call upon the owner to commence through Professional within such time as may be specified (but not less than thirty (30 days) and to complete within the period as specified in the notice but not more than ninety (90) days from the date of receipt of such notice, such structural alterations/modifications/up-dates or repairs, as deemed necessary and if at the expiration of the aforesaid period such alterations/modifications/updates or repairs have not been commenced or completed to the satisfaction of Authority it shall issue to the said owner a notice in writing ordering the demolition within thirty (30) days from the date of receipt of such notice.

7-4.2. If the Technical Committee on Dangerous Buildings (TCDB) considers it impracticable to render such building or part thereof fit for human habitation the concerned Controller of Buildings may by notice in writing call upon the owner to demolish it in a period specified by the committee.

7.5. Demolition of Dangerous Buildings on Expiration of Notice Period.
If at the expiration of the period specified in the notice and order to demolish a building or part of a building issued under Clause 7-4 has not been complied with the Authority may direct, by an order in writing, the demo thereof by through approved contractor (who has on his roll at least one Professional responsible for undertaking all necessary safety measures during the process of demolition) as per procedure laid down by the Authority. The credit if any, of the cost of such demolition and sale after appropriation, shall be paid to the owner after deducting the charges accrued by the Authority such demolition. In case the sale proceeds are insufficient to meet total charges of the Authority for such demolition the same be recovered from the owner as the arrears of land revenue.

7-6. Extension of Period For Repairable Buildings
7.6.1. For sufficient causes, the Authority may recommend and refer to extend the time allowed under, or prescribed by Clause 7-4 above, to the Committee (TCDB).

7-7. Evacuation of Dangerous Buildings
7-7.1. If in the opinion of the Authority, any building, wall, or structure or anything affixed thereto is in a hazardous or dangerous state, authority may, by notice in writing, require the owner or occupier thereof forthwith either to remove the same or to cause such repairs to be made thereto as the Authority considers necessary for the public safety, and if the danger appears to be imminent, the Authority may forthwith take such steps as may be required to avert such danger, including the evacuation without notice from such building of all the occupiers thereof.

7-7.2. Any expenses incurred by the Authority under Clause 7-7.1 shall be paid by the owner concerned.

7-7.3. When the owner of any building, wall, structure or any thing affixed thereto fails to execute the repairs required from him by the Authority under Clause 7.7.1. the tenant/occupy of such building, wall, structure or anything affixed thereto may, with the previous approval of the Authority, carry out such repairs.

7-7.4. Except with the permission in writing of the Authority no person shall enter into or remain in any building from which the tenant/occupier has been removed under Clause 7-7.1.

CHAPTER 8 – TEMPORARY WORKS IN CONNECTION WITH
BUILDING OPERATIONS (SAFETY AND SECURITY
MEASURES

8-1. Site Hoardings
No person shall start building works on a site abutting on a street without having first provided hoarding or barriers to the satisfaction of tire Authority along the whole length of such site so as to prevent danger or injury to the public or to the persons employed in the work provided however that this Regulation does not apply in the case of building works in connection with structures situated at least l5ft.(4.5m) away from a public street and being not more than 25ft.(7.5m) in height.

8-2. Use of Public Streets
No part of any street shall be used in connection with the construction, repair or demolition of any building except with the written permission of the Concerned Authority. Any person holding such permission shall put up and maintain to the satisfaction of the Concerned Authority, fences or barriers in order to separate the building work from such street. Where such separation is not possible he shall make arrangement for the security of public to the satisfaction of the Concerned Authority.

8-3. Obstruction to be lit & marked
8-3. 1 Any person causing any building material or other things to be deposited, any excavation to be made, or any hoarding to be erected shall at his own expense cause sufficient and adequate red lights to be fixed upon or near the same and shall continue such lights every night from sunset to sunrise while such materials, hoardings, things or excavation remain. In addition to above, red flags of reflectorized material shall be provided during daytime.

8-3.2. Any excavation is to be sufficiently fenced to a height of at-least 4ft.(1.21m) until it is filled up.
8-4. Utility Services not to be Obstructed
All material, hoarding, fences or other obstructions on any street shall be kept clear of any fire hydrants if any, and, other utility service installations, or alternative arrangements shall be made and precautions shall be taken according to the laid down procedure of the utility agencies and to the satisfaction of the Concerned Authority to divert or keep clear of obstruction of any roadside or other drain during the period of temporary obstruction.

8-5. Removal of Obstruction after Completion of Works
All obstructions shall be removed within seven (7) days of the completion of the work and the street and all drains and public utility installations shall be left in clean, tidy and in serviceable conditions.

8-6. Dangerous Obstruction
If any material, hoarding, excavation or any other thing near or on any street, shall be, in the opinion of the Concerned Authority, dangerous to the passers-by along such street, the Concerned Authority shall cause the same to be removed, protected or enclosed so as to prevent danger there from and shall be entitled to recover the expenses thereof from the owner of such materials or from the person who made such hoarding, excavation or other thing to become dangerous.

8-7. Stability of Adjacent Buildings
No excavation or dewatering or earthwork or demolition of, a building which is likely to effect the stability of adjacent building shall be stated or continued unless steps before and during the work to prevent the collapse/damage of any adjacent building or the fall of any part of it.

8-8. Filling of Excavated Site
A site once excavated shall not be kept open and idle for a period beyond the validity period of building plan, failing which the Authority shall not revalidate the building plans and shall inform the Concerned Authority for further appropriate remedial measures and in case of any mishaps the owner shall be responsible for life and property of the effectees.

8-9. Adequate Safety Measures
8-9.1. Adequate safety measures shall, where necessary, be provided and used to protect any persons from falling on earth rock or other material of or adjacent to any excavation or earth work.

8-9.2. Material shall not be placed or stocked near the edge of any excavation so as to endanger persons working below.

8-9.3. No load shall be placed or moved near the edge of any excavation, where it is likely to cause a collapse of the side of the excavation and/or endanger any person.

8-9.4. Where vehicles or machines are used- close to any excavation there shall be measures to prevent the vehicles or machines from over-running and falling into the excavation or causing collapse of any side of the excavation.

8-9.5. In all buildings of greater than 20 ft. (6m) height, temporary rails/ scaffolding/barriers shall be installed during construction at the edge of slabs and around all openings such as lift, stairwell, etc.

8-10. Supervision of Demolition work
The demolition of a building and the operations incidental thereto shall only be carried out under the direct supervision of a Professional.

8-11. Safe Loading
No roof, floor or other part of the building shall be so overloaded during demolition and construction with debris or materials as to render it unsafe.

8-12. Scaffolds
8-12.1 Suitable and sufficient scaffolds- shall be provided for all work that cannot safely be done from the ground or from part of the building or from a ladder or other available means of support, and sufficient sale means of access shall be provided to every place at which any person has to work at any time.

8-12.2 Every scaffold and means of access and every part thereof shall be adequately fabricated with suitable and sound material, and of re-strength for the purpose for which it is used, shall be properly supported and shall where necessary be sufficient and properly strutted or braced to ensure stability. Unless designed as independent structures they shall be rigidly connected to a part of the building which is of sufficient strength to afford safe support. All scaffolds, working gangways, runs and stairs shall be maintained to ensure safety and security.

8-12.3. All vertical members of scaffolds on ground level facing road side should be adequately wrapped with spongy materiel up to a height of at least 7 ft. (2.13m) and for any horizontal member if used upto a height of 7 ft. (2.13m) from ground, should be wrapped all along its length with such material

8-13. Road Side Protection
8-13.1. To ensure adequate safety of the pedestrian and other road users, aft buildings having a height of over ground + 2 floors should have adequate arrangement by way of providing protective covering of suitable material such as Hessian sheets/Burlap etc. as per requirement.

8-13.2. Adequate provision of safe passage for pedestrian shall be provided, in case the scaffolding covers part of the road/footpath.

8.14. Working Platform
8-14.1. Every working platform from which a person is liable to fall which is more than 7ft. (2.13m) height shall be at least 2ft. (0.6m) wide provided the platform is used as a working platform only and not for the deposit of any material.

8-14.2. A clear passageway at least 1.5ft.(0.45m) wide shall be left between one side of any working platform and any fixed or deposited materials.

8-15. Guard Rails
Every side of a working platform, gangway and stair shall be provided with a suitable guardrail of adequate strength, to a height of at least 3′(1m) above the platform, gangway or steps.

8-16. Ladders

8-16.1. Every ladder shall be of good construction, sound material and adequate strength for the purpose for which it is used.

8-16.2. Every ladder shall be securely fixed when in use and shall not have any missing or defective rungs.

8-17. Work on Sloping Roofs
8-17.1. Where work is to be done on the sloping surface of a roof, suitable precautions shall be taken to prevent persons employed from falling off.

8-17.2. Suitable and sufficient ladders or boards, which shall be securely supported, shall be provided and used to avoid concentration of loads leading to unsafe conditions.

8-17.3 Where persons are employed in a position below the edge of a sloping roof and where they are in position of being endangered by work done on the roof, suitable precautions shall be taken to prevent tools or materials falling from such roofs so as to endanger such persons or passers-by.

8-18. Precautions for Raising and Lowering Loads
For raising or lowering loads or for suspending them by either hand or power operation the following precautions shall be observed:
8-18.1. No broken wire rope shall be used.
8-18.2. No chain shall be used which has been shortened or jointed to another chain by means of bolts and nuts.
8-18.3. No chain or wire rope shall be used which has a knot tied in any part which is under direct tension.
8-18.4. Provide with an efficient device to prevent the displacement of the sling or load from the hook or of such shape as to reduce as far as possible the risk of such displacement.
8-18.5. All debris and waste material during construction shall be disposed off through well designed chutes from each level of under construction building of height over Ground + 2 floors or more.

8-18.6 The vertical hoist platform used shall be enclosed/protected by proper barrier. Every opening of lift shaft or other such vertical voids or openings in slab etc. where a person is likely to fall shall be protected by safety barrier and properly lit. Any area e.g. basement, where natural light is not available or which is dark shall be so illuminated to eliminate any risk of life or hazard to users.

CHAPTER 9 – SPACE REQUIREMENTS IN AND ABOUT
BUILDINGS

9.1. Space for Electrical Sub-Station
A minimum space of 16ft. x 2lft. (5m. x 6.5m) (or as per requirement of KESC) shall be left for electrical sub-station which is abutting on road side/street or has a clear passage of 16ft. (4.87m). width for public sale, commercial, residential building and industrial building having an area in excess of 25,000 Sq.ft.(2323Sq.m) all Category III and Category IV buildings. In the event that KESC sub-station is not required, this space may be utilized as per Regulations.

9-2. Method of Measuring Minimum Clear Space
The minimum clear space prescribed between a building and from the property line shall be measured from the external face of the perimeter wall enclosing the covered or usable area of the building after its greatest projection from the building, at right angles to the plot boundary, and excluding permissible chajjas and balconies. If there are more boundaries than one in the plot affecting the building, the above requirements will be satisfied at all such boundaries also.

9-3. Separate Approach for every Building

Every building more than 35 feet (10.5m) high not abutting on a street shall have an access for an approach from the street, open to the sky at least 13ft.(4m) width.

9.4. Projections beyond Property Limits
No projections or overhanging features shall be permitted beyond property limits except where permitted under the Regulations.

9-5. Allowable Projections
9-5.1. Maximum allowable projection of chajjas and sunshades in compulsory spaces shall be 2.5ft.(0.75m) or half the width of COS whichever is less.

9-5.2. No construction shall be allowed in the chamfered portion upto l7ft (5.17m) measured from the adjacent road.

9-5.3. Open balconies projecting on to public streets from buildings abutting such streets be permitted by the authority such projection shall not be used as a room as per conditions stated here under:

Width of Street

Max. length of Balconies

Max. projection

Min. height above street level from center of street Balconies and sunshades

30 ft (9.13m) & less than 40ft (12.18m)

23 ft (7m)

2ft (60cm)

17ft (5.17m)

40 ft (12.18m) & less than 50 ft (15.2m)

23 ft (7m)

3ft (90 cm)

17 ft (5.17m)

50 ft (15.2m) & above

23 ft (7m)

4ft (120cm)

17ft (5.17m)

In case of corner plots no balcony will be allowed at the corner of the plot below 17 ft (5.17m).

9-6. Residential Buildings
9-6.1. No habitable room shall have a floor area, of less than 100 sq ft (9.3 sq m).

9-6.2. The minimum width of a habitable room shall be 8ft.(2 44m).

9-6.3. The minimum floor area of kitchen shall be 50 sq.ft.(4.53 sq.m). The minimum width of kitchen shall be 6ft.(1.8m).

9-6.4. The minimum areas and widths of W.C.’s and bathrooms shall be:

W.C

15 sq ft (1.4 sq m)

3.5 ft (1.07m)

Shower

15 sq ft (1.4 sq m)

3.5 ft (1.7m)

Combined W.C. and Bathroom

35 sq ft (3.25 sq m)

4.5 ft (1.38 m)

9-6.5. The minimum clear height of rooms under any structure member shall be except in the cases when central air conditioning provides are applicable as purchase No.10-8-1:

Habitable rooms

9.5 ft (2.65m)

Kitchens W.C.’s. Latrine

9.5 ft (2.65m)

Bathrooms,

8 ft (2.43m)

Garages and Car parch

7.5ft (2.28m)

Passages, galleries, corridors

7.5 ft (2.28m)

Dress Room

7 ft (2.13m)

9-7. Commercial Buildings
9-7.1. The minimum floor area of a shop shall be 100 sq ft.(9.29 sq m) and the minimum width of the shop shall be 8ft.(2.4m).

9-7.2. The shop having a loft shall have carpet area 100 sq.ft. (9.29 sq.m) and a minimum height of 16 ft.(4.87m) and with loft area of not exceeding 40% of the carpet floor area.

9-7.3. The minimum ceiling height of an arcade shaft be 8ft (2.5m)

9-7.4. 40% of the shopping area may have shops of minimum floor area of 56 Sq.ft(5.2 sq. m) provided they are not facing the road.

9.7.5. The minimum clear height of shop will be 10ft (3m).

9-7.6. Clear width of Arcade between inner surface of the outer column and shop shaft be minimum of 5′-6 and width from outer column and shop shaft be 8′.

Staircases

9-8.1. The riser of all buildings shall not be more than 6 inches (15 cm) and the tread shall not be less than 10 inches (25cm) except for residential houses where the maximum riser shall be 7 inches (1 cm) and the minimum tread will be 9 inches (23 cm). However, for staircases to lofts, circular staircases to non-public access mezzanines and heights not exceeding 7 feet 6 inches (2.25 m) staircase risers and treads will be worked out through the following formula: 2 R + T = 22 where R is riser and T is tread and the minimum T is 6 inches.

9-8.2. For all buildings other than Category I buildings and bungalows, the minimum width of staircases shall be 4 ft.(1.2m). The distance from any point to the nearest staircase shall not exceed 100 ft. (30m). The minimum clear headroom under beams and stair landing shall be 7 ft.(2.1m).

9-8.3. Other than bungalows, all staircases shall be provided with a handrails.

9.8.4. A handrail shall be provided on each side of the staircase when the staircase is 6ft (1.8m) wide or more.

9-8.5. For all buildings other than bungalows there shall not be more than 15 risers between each landing in a straight flight. Depth of the landing shall not be less than the width of the flight.

9-8.6. Winders shall be permitted in Category I buildings and bungalows only.

9-9. Lifts

No lift will be of capacity less than 6 person, and lifts shall conform to the technical provisions of BS5655 with respect to all safety devices, procedures of examination and annual testing/certification of lifts by a professional engineer of concerned disciplines.

The following recommendations will be considered in the design of lifts:-
Minimum provision of Lifts.

Minimum Climbing Height

Minimum Number of Lifts

Capacity

From 46ft. (14m) to below 59 ft.(18m).

1

450 kg (6 passengers)

59 ft (18m) and above

2

450 kg (6 passengers)

Additional number of lifts to be provided by the designer professional keeping in view the size, speed and size of brand of lift, type and height of buildings etc.

9-10. Minimum Requirements of Places of Assembly
The minimum clear heights of places of assembly shall be 12ft.(3.65m).

9-11. Godowns and Warehouses

9-11.1. No godown except a store shall be provided in a residential building.

9-11.2. Godowns warehouses shall be designed, adopted or used for storage purposes only;

9-11.3. In every warehouse and godown there shall be exhibited by the owner, at some appropriate place, permanently and conspicuously, a notice incised or embossed on metal, plastic or similar permanent material in the following form, stating the load for which the floor has been designed with letters to be at least 1 inch (25mm) wide & 3 inch (75mm) high. In case of inflammable or explosive materials, being stored, prior permission from the relevant authorities shall be obtained.

NOTICE
This floor has been designed, to sustain a superimposed load of 10 lbs per sq ft (48.9 kg per sq m)

CHAPTER 10 – LIGHTING AND VENTILATION

10-1. Size of external openings
10-1.1. Every room, other than rooms used predominantly for the storage of goods, shall be provided with natural light and natural ventilation by means of one or more openings in external walls. These openings shall have a combined area of not less than 10% for habitable rooms and 7.5% for other rooms of the floor space of such opening, and the whole of such openings shall be capable of allowing free and uninterrupted passage of air.

10-1.2. Area for openings in case of warehouse, godown storage places etc. shall not be less than 5% of the floor space unless the space is mechanically ventilated.

10-2. Size of Internal openings
Unless the light and ventilation requirements are met by an air well or ventilation duct, all internal habitable rooms must have openings in internal air welts in addition to door openings not less than 7.5% of the floor area of such room. Access for maintenance of shaft be provided at level for where the shaft is commence.

10-3. Internal Air Wells
10-3.1. Habitable rooms may receive daylight and natural ventilation from internal air wells which shall inform with the following minimum sizes:

10-3.1.1. For buildings up to 2 storeys, 50 Sq.ft (4.6 sq.m) with minimum width of well 5ft.(1.5m).

10-3.1.2. For buildings with 3 to 5 storeys. 100 sq.ft..(9.3 sq.m) with minimum width of well 8ft. (2.44m).

10-3.1.3. For buildings higher than 5 storeys 100 sq.ft. (9.3 sq.m) plus 10 sq.ft. (0.93 sq.m) for each additional floor over 5 storeys and minimum width of well 10 ft.(3 m).

10-3.2. Where only kitchens, W.C.’s and bathrooms receive daylight and ventilation from air-wells, their sizes shall conform with the following as minimum:
10-3.2.1. For buildings up to 2 storeys 25 sq ft.(2.3 sq.m) with minimum width of well 3 ft.(0.9m).
I
10-3.2.2. For buildings with 3 to 5 storeys 50 sq.ft (4.6 sq m) with minimum width of well 5 ft.(1.5m).

10-3.2.3. For buildings higher than 5 storeys 50 sq.ft. (4.64 Sq.m) plus
5S sq.ft.(0.46 sq.m) for each additional floor with minimum width of well 5 ft. (1.5m).

10-3.3 Access for maintenance of each such shaft shall be provided at lowest level of the shaft.

10-4. Permanent openings in Kitchen
Every kitchen shall have openings for permanent ventilation into the external air space not less than 15% of its floor area.

10-5. Water Closet, Bath Room & Ablution Places
Every water closet, urinal stall, and bath room and ablution area shall be provided with natural lighting and ventilation by means of one or more openings in external walls having a combined area of not less than 28 sq.ft. (0.2 sq.m) per water closet, urinal or bathroom except where adequate and permanent mechanical ventilation is provided and which discharges into an open space.

10-6. Garages
Every garage shaft be provided with opening of not less than 5% of the floor area for ventilation and lighting incorporated in a wall or in the door.

10-7. Staircases
All staircases which are enclosed shall be provided with adequate lighting and ventilation from openings not less than 7.5% of the staircase area.

10-8. Mechanical Ventilation and Central Air-Conditioning waiver & minimum
requirement.
10-8.1. Where undertaking for central air-conditioning and permanent mechanical ventilation is provided, the relevant clauses of these Regulations dealing with natural ventilation, lighting and heights of rooms may be waived.

10-8.2. Where permanent mechanical ventilation in respect of lavatories, water closets, bath rooms or corridors has been provided for and maintained in accordance with the following clauses, conditions relating to natural ventilation and natural lighting under these Regulations shall not apply to such lavatories. water-closets bathrooms or corridors.

10-8.3. Basement or underground car parks and other enclosures below ground level shall be provided with mechanical ventilation.

10-8.4. Cinemas and other projection rooms where photographic film is being used, processed or stored; which are situated in the internal portion of the building; and in respect of which no such external walls (or those overlooking verandahs, pavements or walkways) are present, shall be provided with mechanical ventilation or air conditioning.

10-8.5. In case of mechanical ventilation and central air conditioning for all types of buildings and spaces HVAC relevant code of Practice as may be approved by the Authority shall be followed.

CHAPTER 11 – BUILDING STRUCTURE DESIGN AND
CONSTRUCTION REQUIREMENTS

11-1. Loads and Design
Structure analysis, design, detailing and loading shall be in accordance with the requirements of current Uniform Building Code (UBC) and American Code or British relevant Code or any other Code. Structure shall however be designed by only one approved Code.

11-2. Seismic Design
Seismic Risk Zone for Karachi will be zone (with reference to UBC-97) which is equivalent to Peak Ground Acceleration (PGA) of 16% g to 24% g.

11-3. Sub Soil Investigation
In view of the structural design in Seismic hazard zone, type of Sub-Soil for foundation should be thoroughly ascertained by geo-technical investigation under the direct supervision of qualified and experienced geo-technical engineers. The Soil Report should correlate the sub-soil type with UBC- 97 (or current) Sub-Soil list.

11-4. Wind Load
Wind load should be based on the velocity and gust factors data from local Meteorological Department,

11-5. Erection on Reclaimed site
11-5.1. No building foundation shall be erected upon a site reclaimed by Town sweepings or other refuse, except on recommendation of Geo-technical and Structural Engineer.

11-5.2. No building plans shall be approved on open nallahs public sewers and the like.

11-6. Protection of Existing Services
During the making of an excavation in connection with a building works or services, adequate precautions shall be taken to secure the existing services.

11.7. Foundation Near drains
Where a building is to be erected adjacent to existing buildings, or near a drain/ nallah or an excavation at a distance less than depth of the said drain/nallah or excavation or such as to affect the stability of drains/nallah, the owner, through a Structural Engineer, shall satisfy the Authority that the foundations of the building have been carried down to a level safe guarding its stability.

11-8. Specifications
Specifications of Material Quality Control and workmanship will be of high quality and in accordance with the requirements of ACI Building Codes. Uniform Building Code (UBC) and ASTM Standards.

11-9. Testing of Materials
Regular testing will be carried out of materials such as A Cement, Concrete and Reinforcing Steel and all Architectural materials the Quality Control and Quality Assurance Criteria laid down in standards of FIDIC, ASTM, OR ACI/UBC and Project Specifications. The Quality Assurance Program of the Architect/Engineer may also be followed.

11-10. Supervision
Construction supervision and quality assurance will be carried out by full time/top supervision by the designer/supervising engineers/architects/inspectors etc. as required in these Regulations. Contractor/Builder’s/Developers full time supervisory staff for the category of buildings in these Regulations shall carry out supervision and quality control.

CHAPTER 12 – WATER SUPPLY, DRAINAGE & SANITATION

12-1. Water Service Pipe
12-1.1. Except as permitted in the following paragraph (12-1.2), underground water service piping and the building sewer line shall be not less than 7 ft (2.13m) apart horizontally and shall be separated by undisturbed or compacted earth.
12-1.2. The water service pipe may be placed within 7ft. (2.13m) of sewerage line provided that the bottom of the water service pipe is at least 12 inch (300mm) above the top of the sewer line.

12-2. Minimum Storage Capacity for Category “IV” buildings
Minimum capacity of water storage tanks in buildings of Category IV shall be:
12-2.1. Overhead tank. = 1 day + 25% reserved for fire fighting
12-2.2. Underground tank = 2 ½ days out of the reserved capacity
25% shall be kept reserved for fire fighting purposes by making suitable arrangements.
12-2.3. Distribution of Water within the premises:
The design of water supply pipe work, underground and overhead tanks shall be in accordance with the following schedule:-
Per capita water requirements/demand for various occupancies.

S.NO

Type of Occupancy

Consumption per head/day (in litre)

1

Residential

135

2

Institutional
a) Day Schools

45-100

b) Boarding Schools

135-225

c) Medical Hospitals

450

d) Medical Quarters & Hostels

135

Assembly-Cinema. Theater
Auditorium etc. (per seat of accommodation).

45

3

Government or semi-public business.

45

4

Mercantile (commercial)

90

5

a) Restaurants

90

b) Shopping Centers, Stores
(per toilet fixture)

200

c) Other Business Buildings

45

6

Hotels

225

7

Industrial

45-135

8

Storage including warehouse

30

9

Service Station

200

10

Bus/Truck Stands (per vehicle)

200

11

Live Stock (per animal)

45-150

12

Poultry (per chicken)

45

12-3. Recycling Plant and Treatment of Effluent/Sewage
In case recycling plant or treatment of effluent/sewage are provided, all requirements for construction and maintenance as set by National Environmental Quality Standard (NEQS) shall be followed:

12-4. Sanitation and Solid Waste
12-4.1. All medical & hospital waste shall be safely collected, transported and disposed off in accordance with the public health standards (as prescribed by Sindh Environmental Protection Agency) and up to satisfaction of the Authority.

12.4.1.1. All industrial waste shall be treated in accordance with the National Environment Quality Standards (NEQS).

12-4.1.2. All hospitals shall provide the disposal of medical waste as per National Environment Quality Standard (NEQS).

12-4.1.3. In all public sale projects the central waste disposal system shall be provided by the developer.

12-5. Digester/Septic tank
Where no public sewer is in existence, all sewage shall be posed off after properly treating, through digester or septic tank, and effluent shall be discharged safely into a soak pit as a temporary measure till such time as a system is laid out.

12-6. Soil Pipes, Waste Pipes and Ventilating Pipes
12-6.1. A trap shall be used to maintain the water seal and make system fool proof against closing and blockages.

12-6.2. In no case shall the internal diameter of a soil pipe or waste pipe be less, than the internal diameter of any pipe or of the outlet of any appliance which discharges into it.

12-6.3. All the joints shall be:-
12-6.3.1. Properly prepared by the use of rubber gasket or water sealant materials for jointing;

12-6.3.2. Adequately supported throughout its length without restraining thermal movements, any fitting which gives such support being securely attached to the building;

12-6.3.3. So placed as to be reasonably accessible for maintenance and repair.

12-6.4. Ventilating pipe shall be provided in all stacks carrying wastewater or sewage, in accordance with the plumbing code.

12-6.5. Drain water pipe of appropriate dimension shall be provided as per approved standard.

12-7. Sanitary Provisions
The minimum requirements/sanitary provisions as prescribed hereunder shall be followed:

12-7.1. For every five (5) single room units or servant quarters: one washbasin, one W.C. and one (1) bathroom shall, be provided.

12-7.2. For every ten (10) bedrooms or less in a Boarding House or Guest House there shall be at least two (2) W.Cs, two (2) washbasins and two (2) showers.

12-7.3. For every 20 (twenty) persons in a Dormitory and Hostel there shall be at least three (3) W.Cs three (3) wash-basins and three (3) showers, and for every 10 (ten) additional persons one (1) W.C., one (1) wash-basin, and one (1) shower are to be added.

12-7.4. In an office with 30 (thirty) persons (calculated at a rate of one (1) person per 100 sq ft.(9.29 sq.m) there shall be minimum of three (3) W.C.s, two (2) washbasins and one (1) urinals. For every additional 20 (twenty) persons there shall be one (1) W,C., one (1) wash-basin and one (1) urinal One (1), wash-basin or equivalent washing space per 25 (twenty five) or less persons shall be provided for ablution purposes.

12-7.5. In factory with 30 (thirty) persons (calculated at a rate of
one (1) person per 100 sq.ft. (9.29 sq.m), there shall be minimum of three W.Cs, two (2) washbasins and one (1) urinals. For every additional 20 (twenty) persons there shall be one (1) W.C., one (1) wash-basin and one (1) urinal One (1) wash-basin or equivalent washing space per 25 (twenty five) or less persons shall be provided for ablution purposes, and shall be divided proportionately amongst the genders.

12-7.6. Shopping Center – a minimum of three (3) W.Cs one (1) urinals, and one (1) washbasin shall be provided for 3000 sq.ft.(278.8 sq.m) or less total floor area. For every additional 2000 sq.ft.(185.8 sq.m) floor area, one (1) W.C. one(1) washbasin, and one (1) urinal shall be provided.

12-7.7. Public Assembly building, two (2) W.C.’s, one (1) washbasin, and three (3) urinals shall be provided for 1500 sq.ft. (139 sq.m) or less of total floor area and for every additional 1500 sq.ft.(139 sq.m) of floor area one (1) W.C. one (1) wash-basin and two (2) urinals shall be provided.

12-7.8. For Mosque, five (5) ablution space for every hundred ‘Namazis’ and two (2) W.Cs, one shower, room shall be provided for every additional 100 Namazis the number of ablution space will be extended by 8,6,4 respectively plus special arrangement for the female having a capacity of 300 Namazis three ablution and one(1) W.C shall be provided.

12-7.9. Cinema and Auditorium – for every 50 seats or less, two(2) W.C.s, two(2) urinals and two(2) wash-basins shall be provided, and for every additional 50 seats one(1) W.C two(2) urinals and two(2) wash-basin shall be provided and shall be divided proportionately amongst the genders.

12-7.10. School four(4) W.Cs, and two(2) washbasins per 100 students and for every additional fifty(50) students, one(1) W.C. and one(1) washbasin shall be provided.

12-7.11. Hospital, for every 10 beds in a general ward there shall be at least one (1) water closet, one (1) wash-basin, one (1) ablution tap and one (1) bathroom with shower. One(1) kitchen sink shall be provided in each ward.

12-7.12. For 50 seats or part thereof of Restaurant, one(1) water closet, one(1) urinal, one(1) wash-basin shall be provided 12-7.13. Two urinals may be replaced by W.C while proportionately dividing the fixtures among the genders.

12-7.14. Provision of one (1) W.C. for special persons shall be provided.

12-7.15. All fixture shall be divided proportionately amongst the genders.

12-8. Manholes and Inspection Chambers
12.8.1. At every change of alignment, gradient or diameter of a drain, there shall be a manhole or inspection chamber Bends and junctions in the drains shall be grouped together in manholes as far as possible. The spacing of manholes in case of pipe having a diameter 6 inch/8 inch (150 mm / 200 mm) shall be 50 ft/110ft (15.2m/35.5m) according to respective diameters and in case of diameter more than 8 inch (200mm) the distance shall be not more than 150 ft.(45m).

12-8.2. The chamber shall be so designed to make the cleaning and inspection conveniently.

12-8.3. Proper benching shall be provided equal to half the diameter of pipe in semi-circular shape with proper slope in either direction so that no solid shall accumulate in the Manhole Inspection Chamber.

12-8.4. C. I. Rungs shall be provided at l6 inch (400mm) center to center in all manholes over 4 ft. (1.2m) in depth. The size of the manhole cover shall be such that there is a clear opening of at least 2ft. (60 in diameter for manholes exceeding 4ft. (1.2m) in depth.

12-9. Storm water drainage
12-9.1. The roofs of every building and the floor or balconies abutting on a street or constructed over a street, shall be so constructed or framed as to permit effectual drainage of the rain water there from, by means of a sufficient number of leaders of adequate sizes, so arranged, jointed, and Ii ed as to ensure that the rain water is carried away from the building without causing dampness in any part of the walls, or foundations of the walls, or foundations of the building, or those of an adjacent building, provided the fall is not greater than 20 ft. (6m) in case of spouts.

12-9.2. A leader shall not discharge into or connect with any soil pipe or its ventilating pipe, or any waste pipe or its ventilating pipe, nor shall it discharge into a sewer.

12-9.3. Rain water from leader spouts etc. shall not discharge onto a public street at a height greater than l2 inch (300mm) from that street, or onto a neighboring property.

CHAPTER 13 – FIRE RESISTANCE AND FIRE PRECAUTIONS

13-1. General
Every building shall comply with the provisions laid down in Chapters 13 and 14 in-respect of fire resistance and fire precautions, unless noted otherwise.

13-2. Stand Pipes System
13-2.1. Requirements for Fire Prevention and Fire Extinguishing shall be the following:-

13-2.1.1. All buildings which are ground plus three storeys or above or more than 43 ft.(13m) high shall be provided a set stand pipe/pipes as given below:-
a) Buildings from (4) storeys upto 8 storeys in height shall be equipped with not less than 2 inch (5.1cm) dia stand pipes.

b) Buildings over 8 storeys in height shall be equipped with not less than 4 inch (10cm) dia stand pipe.

13-2.1.2. The number of stand pipes shall be such that all parts of every floor area are at a maximum distance of 120 ft. (36.5m) from the stand point.

13-2.1.3. In so far as practicable, stand pipes shall be located with outlets within stairway enclosures but if these are not available the stand pipes shall be located in a common corridor. In any case, one shall be located in the main.

a) The construction of stand pipes shall be of mild steel.
b) Stand ripe risers shall extend from the lowest to the top most storey of the building or part of building which they serve.
c) When more than one stand pipe is required they shall be interconnected at their bases by pipes equal in size to that of the largest riser.

d) Every stand pipe or stand pipe system in case of inter connected stand pipes, shall be equipped with a fire department approved in-let connection of corrosion resistive metal (e.g. gunmetal) located on an outer building face nearest to street approximately 20 ft. (6m) to 30 ft.(9.13m) above finished ground and suitably marked “Fire Department Connection Stand Pipe”.

e) Stand pipes shall be provided in every storey with a 1.5 inch (3.8cm) diameter flexible hose not less than 100 ft. (30m) long, with a 0.5 inch (1.25cm) nozzle, hang in an approved rack or cabinet.

f) The stand pipes shall be fed by an over head water tank reserved solely for this purpose. The minimum capacity of this tank shall be 5000 gallons (18 with a minimum of 7ft. (2m) head above the highest discharge point.

13-3. Automatic Sprinkler System
13-3.1. Automatic sprinkler system shall be provided in the following:

13-3.1.1. In every institutional building which serves restrained or handicapped persons.

13-3.1.2. In covered car parking areas in building for which upper storeys are designed for other uses when such parking area exceeds 5000 sq.ft (464.6 sq.m).

13-3.1.3. Bus garages or terminals for passengers serving more than 4 buses at a time.

13-3.1.4. Each floor mercantile and industrial building which is more than one storey high and which 20,000 sq.ft (1858.73 sq.m) covered area.

13-3.1.5. All building compartments used for manufacture, display or sale of combustible materials and products which are more than 7000 sq.ft. (650.56 sq.m) in covered area.

13-3.1.6. All areas of theatres except auditorium, music hall, and lobbies.

13-3.1.7. All building areas used primarily for storage of goods, and material including areas clearly specified for storage of incombustible materials and goods, which are more than l000 sq.ft. (92.93 sq.m) in areas.

13-3.1.8. No sprinkler provision, should be made in the immediate vicinity of generators or any electrical equipment.
13-4. Sprinkler System Construction.
13-4.1. Sprinkler System Construction shaft be in the following manner:
13-4.1.1. Sprinkler pipes, hangers and sprinkler heads shall be protected from corrosion.

13-4.1.2. Every sprinkler system shall be equipped with a fire department approved inlet connection located on an outer building face nearest to street approximately 20 to 30ft. (6 to 9.1 3m) above finished ground and suitable marked “Fire Department Connection – Automatic Sprinklers”.

13-4.1.3. Automatic Sprinkler System shall be fed by a overhead water tank reserved solely for this purpose. The tanks shaft be capable of supplying 25% of the Sprinkler heads for 20 minutes but the minimum capacity of any tank shall be 5000 gallons (18,952 Lit). There shall be a minimum head of l5 Lbs/Sq ft. (1.02kg/cm) above the highest discharge point.

13-4.1.4. Automatic Sprinkler System shall be arranged to set off automatic fire alarm system simultaneously.

13-4.1.5. Every Sprinkler System shall be provided with a readily accessible outside valve to control all sources of water supply.

13-5. Manual Fire Extinguishing Equipment
13-5.1 Manual fire extinguishers shall be provided as follows:
13-5.1.1. Two extinguishers in stage area, one in each dressing room, one immediately outside each entry in theatres.

13-5.1.2. One extinguisher in each 2400 sq.ft. (223 sq.m) of area of public assembly buildings, but not less than one on each occupied floor, and not less than one in each lab, workshop or vocational room.

13-5.1.3. At lease one extinguisher on each floor at stairway landing and in corridor at each lift or group of lifts in residential and commercial buildings.

13-6. Installation of Interior Fire Alarm System
13-6.1. Installation of interior fire alarm system shall be installed in the following:
13-6.1.1. All hotels, motels, dormitories, more than one storey high
and with a capacity of fifty (50) or more occupants.

13-6.1.2. All hospitals, asylums, nursing homes, and similar institutional buildings accommodating more than (20) twenty occupants above the ground floor.

13-6.1.3. All School buildings with provision of more, than Thirty (30) students above the ground floor.

1 3-6.1.4. All mercantile buildings with more than 1 86m2 above the first floor.

13-6.1.5. All factory buildings exceeding two (2) storey in height and with more than 4000 sq.ft. (371.74 sq.m) above the first floor.

13-6.1.6. All office buildings more than five (5) storeys in height and with occupancy area of more than 100,000 sq. ft. (9293.68 sq.m) above the ground floor.

13-6.1.7. All Cinemas, theatres and similar places public assembly.

13.7. Signal Stations

13.7.1. Signal Stations shall be provided as follows:

13-7.1.1. At least one (1) station shall be located in each storey in an accessible location in the natural depth of exit-way or escape.

13-7.1.2. All stations shall be so located that no point on any floor or the building is more than l50 ft. (45.69m) distant from a station.

CHAPTER 14 – FIRE RESISTIVE STRUCTURAL REQUIREMENTS

14-1. Fire Resistance
14-1.1. For purposes of this chapter every building or compartment shall be regarded according to its use or intended use, and where a building is divided into compartments intended to be used for different purposes, the requirements of each compartment shall be determined separately.

14-1.2. Every element of structure shall be required to have fire resistance for not less than the relevant period specified in Table 14.1 with regard to the building of which it forms part.

Table 14.1 – Minimum periods of fire resistance

Types of Building or Compartment

Minimum period of fire resistance in hours for elements of structure

Ground or upper storey

Basement

Private dwelling house.

1.5

1.5

Private dwelling house.

0.5

1.5

Institutional:
Upto 92ft (28 m) high
Over 92 ft (28 m) high

1
1.5

1.5
2

Residential buildings other than private dwelling house
upto 2storeys high
upto 3 storeys high
upto 92ft. (28m) high
over 92ft high

0.5
1
1
1.5

1
1
1.5
2

Office Buildings:
upto 25ft.(7.5m) high
upto 50ft.(15m) high
upto92 ft (28m) high
over 92 ft.(28m) high

0.5
1
1
1.5

1
1
1.5
2

Mercantile Buildings:
upto 25 ft.(7.5m) high
upto 50 ft.(15m) high
upto 92 ft.(28m) high
over 92 ft. (28m) high

0.5
1
1
2

1
1
2
4

vi) Factory Buildings:
Upto 25 ft.(7.5m) high
Upto 50 ft.(15m) high
Upto 92 ft.(28m) high
Over 92 ft. (28m) high

1.5
1
1
2

1
1
2
4

viii Factory Buildings:
upto 25 ft.(7.5m) high
upto 50 ft.(15m) high
upto 92 ft.(28m) high
over 92 ft.(28m) high

0.5
1
1
2

1
1
2
4

Public Assembly
upto 25 ft. (7.5m) high
upto 50 ft. (l5m) high
upto 92 ft.(28m) high
over 92 ft. high

0.5
1
1
0.5

1
1
0.5
2

Storage & Public Car parks:
upto 25 ft.(7.5m) high
upto 50 ft. (15m) high
upto 92 ft. (28m) high
over 92 ft. (28m) high

0.5
1
2
4

1
2
4
4

14-1.2.1. If any part of a building is completely separated throughout its height both above and below the ground, from all other parts by compartment walls in the same vertical plane, the fire resistance requirement of that part shall be determined solely by height of that part.
14-1.2.2. If any element of structure forms part of more than one building or compartment and the requirements of fire resistance in respect of one building or compartment differ from those specified for any other building or compartment of which the element forms part, such element shall be so constructed as to comply with the greater or greatest of the requirements specified.

14-1.2.3. Any element of structure shall have fire resistance of not less than the minimum period required for any element which it carries.

14-2. Test of Fire Resistance
Every element of structure shaft be capable of resisting the action of fire for the specified test of fire resistance period under the conditions of test appropriate to such an element in accordance with BS-476: Part 1: 1953 and subject to modifications, if any.

14-3. External Walls
14-3.1 Any external wall which is situated within a distance of 4ft.(1.2m) from the relevant boundary, or is a wall of a building which exceeds 50ft:(15.22m) in height, shall be constructed wholly of non-combustible material apart From any external cladding

14-3.2. Any steel beam or column, wherever forming part of or carrying an. external wall constructed of non-combustible material shall also be constructed wholly of non-combustible material.

14-3.3. Any part of a roof shall be deemed to be part of an external wall if it is pitched at an angle of Seventy (70) degrees or more to the horizontal arid covers a habitable space within the buildings.

14-4. Separating Walls and Fire Walls

14-4.1. Separating walls between two adjoining buildings shall form complete vertical separation and shall not have any opening except for the following:

14-4.1.1. Passage of a pipe through a separating wall f the pipe is not a flue pipe and has a diameter not exceeding 1 inch (25mm) ii it is made of combustible material, and 6 inch (150mm) if it made of non- combustible material.

14-4.1.2. An opening which is necessary as a means of escape from fire, if the opening is fitted with a fire door which has fire resistance not less than the period required for the separating wall.

14-4.2. Any separating wall or tire wall which forms a junction with a roof shall be carried above the upper surface of the roof covering to a distance not less than 15 inch (375mm). A separating wall or fire wall shall not be required to comply with this requirement if:-

14-4.2.1. The roofs being separated by the wall are of non-combustible construction;

14-4.2.2. The buildings separated by the wall are residential, office or assembly buildings and do not exceed 40ft.( 12.1 8m) in height.

14-4.3. If any external wall is carried across the end of a separating wall/fire wall such external wall and separating wall/fire wall shall be bounded together.

14-5. Compartmentalization
Every floor or a building shall be divided as far as possible into compartments by means of appropriate fire resistant elements/measures for example fire walls as follows:

14-5.1. Separating one occupancy from another within the same building.

14-5.2. Separating part of a building from any other part of the same building which is used, or intended to be used, for a different function such as residential. institutional, assembly, storage commercial use etc.

14-5.3. Dividing an institutional building, except industrial building, into smaller
compartments of an area not exceeding 3000 sq.yds.(2500 sq.m).

14-5.4. Separating occupancy areas from common circulation areas.

14-6. Construction of Fire Walls
Fire walls shall be constructed in any manner or with any non-combustible material conforming with a minimum fire resistance of two (2) hours.

14-7. Openings in Fire Walls

14-7.1. Openings in fire walls may be fitted with a single or double leaf door with a minimum fire resistance for the following periods:-

14:7.1.1. Door giving access to an apartment from-a common area -0.5 hour

14-7.1.2. Any other case – 1.5 hours

14-7.2 Except in case of fire doors giving access to occupancy areas from common circulation areas, all fire doors must open in the direction of escape.

14-8. Direct Access for Ground Floor and Above

14-8.1. Except for storeys below the first storey, direct access for fire fighting shall be provided from the outdoors to every storey having its floor level less than
82 ft. (25m) above ground by at least one unobstructed window or panel for each 50 ft.(15m) of wall, in each wall to face a street.

14-8.2. An opening for access required in above clause shall be not less 2.6 ft.(1.1m) high by 2 ft.(0.6m) wide, with a sill height of not more than 3 ft. (0.9m) above the inside floor.

14-8.3. Access panels above the first storey shall be readily open able from both inside and outside, or the opening shall be glazed with plain glass

14-9. Protected Shafts

14-9.1. Protected shafts shall be constructed only for stairway lift, chute, duct, or any other purposes which enable persons, things or air to pass between different compartments.

14-9.2. There shall be no opening in shaft enclosures except the following:

14-9.2.1. An opening for a pipe;

14-9.2.2. An opening fitted with a door which has fire resistance of half hour or not less than half the period required in Table 14.1. whichever is more;

14.9.3. Any protected shaft containing a lift or lifts:
14-9.3.1. shall, be ventilated to external air by means of one or more
permanent openings situated, at the top of the shaft and having a total unobstructed area of not less than 1.5 Sq.ft.(0.l3 sq.m) for each lift:

14-9.3.2. shall not contain any pipe conveying oil or gas or any ventilating duct.

14-9.3.3. may have an opening in its protective structure for passage of cables for the lift into the machine room provided that if the opening is at the bottom of the shaft the opening should be as small as practicable.

14-9.4. If a protected shaft serves as, or contains, a ventilating duct, the duct shall not be constructed of, or lined with, any material which increases, the risk of spread of fire.

14-9.5. If a protected shaft consists of a stairway it shall not contain any pipe conveying oil or gas, or a ventilating duct.
14-9.6. A shaft that does not extend to the roof of a building shall be enclosed with top construction of the same strength and fire resistance as that of the shaft enclosure. Such shafts shall be provided with non- combustible vents for the relief of smoke and gases in the event of fire, with an area not less than 10% of the shaft area.

14-9.7. All shafts that extend to the roof of a building shall be ventilated by a window in the side of the shaft of not less than 75% of the area of the Shaft. Such window shall not be located within three 10 ft.(3m) of a interior property line, and its sill level shall not be less than 2.5 ft (0.76m) above the finished root level.

14-10. Fire Resistant Doors
14-10.1. Any fire resistant door shall, if exposed to a test by fire and then fitted in its frame, satisfy the requirements as to freedom from collapse and resistance to passage of flame for not less than the relevant period required.

14-10.2. The clearance between the leaf of the door and the frame or between two leaves shall be as small as practicable.

14-10.3. If two separate doors (whether single or double leaf door) are installed on opposite sides of an opening, the required tire resistance may be achieved by the two doors together or by either of them separately.

14.10.4. Wired glass, if used in fire resistant doors, shall be of a maximum area of 1 sq.ft (0.l sq.m) and shall not be less than ¼” (6mm) thick.

14-11. Miscellaneous Provisions
14-11.1. If any part of an opening in an external wall of building other than a private dwelling house is directly above an opening in an adjoining storey either:-

14-11.1.1. The bottom of the upper opening shall be not less than 3ft. (O.91m) above the top of the lower opening and not less than 1.5 ft.(0.56m) above the upper surface of the floor separating the storeys; OR

14-11.1.2. A horizontal projection of non-flammable material is constructed between the two openings to project 1.5 ft. (0.46m) from the wall.

14-11.2. Where a private dwelling house has an enclosed garage:-

14-11.2.1. The garage shall be constructed of non-flammable material saving a fire resistance of not less than halt an hour;

14.11.2.2. An opening in the wall-separating the garage from the shall at its lowest point be 4 inch (10cm) above the level of the floor of the garage and shall be protected by self-closing doors having a fire resistance not less than half an hour.

14-11.3. In premises with more than 400 persons seating capacity:

14-11.3.1. The stage area shall be separated from the auditorium on either side of the proscenium opening by a fire resisting wall not less than 6 inch (l50mm) thick, of block masonry or its equivalent, carried down to a solid foundation and up to at least 3 ft. (0.91m) above the roof level unless, the roof is of fire resistant construction.

14-11.3.2 Not more than two (2) openings shall be provided in the proscenium wall in addition to the proscenium opening. Such additional openings shall not exceed 20 sq.ft. (1.86 sq.m) area each and should be fitted with a door of minimum half an hour fire resistance;

14-11.3.3. A fire resistant curtain shall be provided to the proscenium opening.

14-12. Enclosures for Cinematographic Equipment
14-12.1. Cinematographic equipment shall be operated only within fire resistant enclosures located outside the auditorium.

14-12.2. The enclosure shall be constructed to have minimum two (2) hours fire resistance.

14-12.3. Two exits shall be provided to each enclosure. These shall be located outside the auditorium and fitted with self-dosing doors with minimum fire resistance of half an hour. The door shall open outwards from the enclosure.

14-12.4. There shall be a minimum number of openings between the projection enclosure and the auditorium, and these shall be fitted with a gravity shutter of minimum half an hour fire resistance overlapping all edges of the openings by not less than 1 inch (2.5cm) when closed. There shall be provided a suitable device to close all shutters simultaneously from any projector head or from a point outside each door.

14-12.5. All enclosures shall be provided with adequate ventilation by suitable openings or shafts of non-flammable construction which shall lead to open air.

14.13. Steel and Metal Structures

14-13.1. All steel and other metal structural members shall be protected with non- combustible materials to provide the required fire resistance.
14-13.2. Concrete fire protection on steel columns shall be reinforced and enclosed by wire mesh, metal clips or spirally wound wire of not less than 12 gauge size with a pitch not more than 4 inch (l0cm).

14-13.3. Where the fin resistant covering on columns is subject to damage by moving vehicles, or handling of merchandise. the fire proofing shall be enclosed upto a height of not less than 5ft.(1.5m) from the finished flooring with a suitable metal covering of adequate strength.

14-14. Air Conditioning Ducts
14-14.1. All air-conditioning and ventilation ducts including supports shall be constructed entirely of non-flammable materials.

14-14.2. No air-conditioning or ventilation duct shall pass through a fire wall or a separating wall.

14-14.3. Where ducts pass through floors or walls other than fire walls or separating walls, the space around the duct shall be sealed with roped asbestos, mineral wool or other non-flammable material to prevent the passage of flames and smoke.

CHAPTER 15 – PRESERVATION OF HERITAGE BUILDINGS

15-1. Definition
These definitions shall confined to this Chapter only.

15-1.1. Heritage Building means any premises or objects declared as protected Heritage under Sindh, Culture Heritage Preservation Act, 1994 by the Govt. of Sindh, Culture, Tourism, Sports and Youth Affairs Departments and the Government of Pakistan Antiquities Act, 1975 and Amendments thereof.

15-1.2. Extension or to “extend” means the making of additions to a Heritage Building which affects its character as such.

15-1.3. “Department” means the Government of Sindh Culture, Tourism, Sports and Youth Affairs Department.

15-2. Designation and Declaration of Special Interest Structures
15-2.1. The Department may. designate and declare -a special architectural, historical, archaeological, artistic, ethnological, anthropological or national interest structure/s (under the Sindh Cultural Heritage BilI-1994) and forward the list of these designated structures to the Authority, as applicable for enforcement of the writ.

15-3. Approval of Building Plans for Heritage Buildings
15-3.1. Any building declared as a Heritage Building by the Government
of Sindh, under the above mentioned preservation Act (1994) shall not be considered for approval by the Authority, except with the prior approval of the department designated as such by the Government of Sindh.

15-3.2. Transferable Development Rights
In the event that the existing total floor area at a Building, declared/notified under the Heritage Law as a Heritage Buildings, is less than the allowable covered area (Floor Area Ratio FAR) as per these Regulations, the owner of the such a building/property shall be entitled t sell unutilized floor area ratio (Total allowable floor area minus the utilized floor area = unutilized floor area), to the owner is of any another property subject to following conditions:-

15-3.2.1. The un-utilized floor area ratio can only be utilized on commercial plots or residential flats sites or residential cum commercial site where there is no restriction on constructions of number of floors, provided this also does not violate other conditions of owning regulations as given in Chapter 25 accept the rules fro floor area ratio, which shall be allowed to the extent the rights of floor area of a Heritage building is purchased by the applicant’s owner of the building requesting to utilize the same FAR for his/their building/project. No change in the land use shall be allowed where such a FAR of the Heritage Building to utilized.

15-3.2.2. The unutilized floor area ratio can be sold to more than one owner, however the maximum unutilized floor area which could be sold to one owner of a property/site shall not exceed 1/3 of the floor area allowed for the said property.

15-3.2.3. The sale of unutilized floor area of the Heritage building must be recorded with Department of Heritage and with the Authority. The Authority shall maintain a separate register for the – maintenance of record of the unutilized floor area of the Heritage building.

15-3.2.4. The purchaser of the unutilized floor area of Heritage Building shall provide a certificate copy of the document certificate by the concerned Heritage Department with regard to the exact covered area utilized In the Heritage Building. The Authority on receipt and verification of such information, by itself, shall, as per the provided in Chapter 25 of these Regulations determine the surplus, covered area which could be sold to other buyers and shall allow the applicant for the utilization of the same in the application project/building.

15-4. Approval for Demolition; Alteration, or Extension
15-4.1. It shall be unlawful for any person to demolish, alter or extend any heritage building without obtaining the prior approval of the concerned Department and completing necessary required formalities of this Authority.
15-4.2. Prior to permitting the alteration, extension to Heritage Building, the Authority shall inform the concerned Department of the Government of Sindh. The Department shall have a period of thirty (30) days in which to express any objection to such an alteration or extension.

15-4.3. In case. of unauthorized or illegal demolition of declared protected Heritage Building no fresh approval of Building Plan on the said plot shall ever be permitted and a fine as permitted by the Ordinance as amended from time to time, shall be imposed by the Authority in addition to any other fine that may be imposed by the Department under the provision of the Sindh Cultural Heritage Preservation Act, 1994 or the Antiquities Act, 1975.

CHAPTER 16 – WIDENING OF ROADS

16-1. Definitions
16-1.1. For the purposes of this Clause “Road Widening” means proposed widening of any road/street by drawing. up new alignments. All the buildings on the roads declared under Road Widening scheme shall be constructed only according to the setback prescribed by MP&ECD in consultation with concerned authorities from time to time.

16-1.2. For the purposes of these Regulations, roads listed in the Table in Clause 16-3, Roads under Widening Scheme shall be considered as declared roads under Road Widening Schemes.

16-2. Notification of Road Widening Scheme
16-2.1. MP&ECD may in consultation with the Concerned Authority declare and notify widening and new alignment of any other road/street.

16-2.2. Before declaring widening of any road/street MP&ECD shall invite public objections as prescribed in these Regulations.

16-2.3. No basement or structure shall be permitted in the portion of the plot affected by Road Widening Scheme.

16-2.4 The FAR allowable on the original plot shall be permitted.

16-2.5. Any COS specified for any building shall be in addition the setback prescribed for Road Widening of the road/street on which it abuts.

16-3. ROADS UNDER ROAD WIDENING SCHEME

S.No

Name of the road

Existing Width (app ft)

Proposed Width (ft)

Remarks

1

Jehangir Sethna Road

80 (24.4m)

130 (39.6m)

2

Aga Khan Road (Tahilram Khem Chand Road)

60 (18.3m)

80 (24.4m)

3

Business Recorder Road (Deep Chand Ojha Road)

100 (30.5m)

120 (36.6m)

4

Nooman Road

42 (12.8m)

80 (24.4m)

5

Princes Street (Chand Bibi Road)

90 (27.4m)

100 (30.5m)

6

Aiwan-e-Saddar Road
(a) Strechen Road
(b) Havelock Road

56 (17.0m)
80 (24.4m)

80 (24.4m)
140 (427m)

7

Aram Bagh Road

52 (15.8m)

80 (24.4m)

8

Zaibunisa Street (Elphinstone Street)

72 (22.0m)

80 (24.4m)

9

Jamila Street (Barness Street)

66 (20.1m)

80 (24.4m)

10

Preedy Street

87 (26.8m)

11

Syedna Tahir Saifuddin Road (Wadhumal Odharam Road)

55.9 (17.0m)

80 (24.4m)

12

McLeod Road (I. I. Chundrigar Road)

82 (25.0m)

116 (35.4m)

13

Club Road & Moulvi Tamizuddin Khan Road

62 (18.9m)

120 (36.6m)

14

M. A. Jinnah Road (Bunder Road)

83 (25.3m to
145 (44.2m)

140 (42.7m to 150 (45.7m)

(i) From Old exhibition to Garden Road 150 (45.7m). ii) From Garden Road to Preedy Street no extension of Road.

iii) From Preedy Street to Mereweather Tower 140 (42.7m)

15

Nishtar Road (Lawrence Road) and its extension up to Agha Khan and Nawab Mahabat Khanji Road

78 (23.8m)

120 (36.6m)

16

Baba-e-Urdu Road (Mission Road)

66 (20.1m)

100 (30.5m)

17

Britto Road

50 (15.2m)

80 (24.4m)

18

Lal Chand Hassomal Road

40 (12.2m)

80 (24.4m)

19

Dr. Ziauddin Ahmed Road (Kutchery Road)

80 (24.4m)

100 (30.5m) to 120 (36.6m)

i) From M. A. Jinnah Road to I. I. Chundrigar Road 120 (36.6m) wide. ii) From I. I. Chundrigar Road to Hoshang Road 120 (36.6m) wide.

20

Agha Khan and Nawab Mahabat Khanji Road (Harris and Embankment Road)

92 (28.0m)

100 (30.5m) to 88 (26.6m)

21

Altaf Hussain Road (Napier Road)

52 (15.8m)

100 (30.5m)

From Lea Market to I. I. Chundrigar Road

22

Shahra-e-Liaquat (Frere Road) and its proposed extension up to Quaid-e-Azam Mazar

72 (22.0m)

120 (36.6m)

23

Hoshang Road

59 (18.0m)

80 (24.4m)

From Dr. Ziauddin Road to Jinnah Hospital

24

Mohammad Bin Qasim Road (Burns Road)

80 (24.4m)

120 (36.6m)

25

North South Road

59 (18.0m)

140 (42.7m)

From Manghopir Road to Gizri.

26

Verley Vines Pedro D’Souza Road

50 (15.25m)

80 (24.4m)

27

Napier Mole Road (From Tower to Keamari)

82 (25.0m)

120 (36.6m)

28

Garden Road

72 (22.0m)

120 (36.6m)

29

Edulji Dinshaw Road

100 (30.5m)

140 (42.7m)

30

Sir Abdullah Haroon Road (Victoria Road from Musical Fountain upto KDA Scheme No. 5 Kehkashan)

80 (24.4m)

120 (36.6m)

i) From Musical Fountain to Hoshang Road 120 (36.6m) ii) From Hoshang Road up to Clifton Scheme 150 (45.7m)

iii) Reservation for railway bridge 200 (61.0m)

31

Northern & Southern Lyari Bank Road (From Mauripur Road to Shaheed-e-Millat Road)

100 (30.5m)

—————-

32

M. A. Jinnah Road (Bunder Road) from Mohan Road to Mereweather Tower).

84 (25.52m to 146 (44.60m)

141 (43.08m to 151 (46.12m)

———————

33

Mir Karam Ali Talpur Road (Napier Road) from Mcleod Road to Syed Mahmood Shah Road – Lea Market).

92 (28.0m to 40 (12.9m)

100 (30.5m)

——————

34

I. I. Chundrigar Road (Mcleod Road) from Kutchery Road to Mereweather Tower)

64 (19.5m to 83 (25.3m)

117 (35.8m)

—————

35

Nishtar Road (Lawrence Road) from Harris and Embankment Road to Tin Hatti Crossing).

80 (24.40 to 120 (36.60m)

140 (42.70m)

—————–

CHAPTER 17 – STANDARDS FOR LAND DEVELOPMENT

17-1. General Standard/Area Standards
All development works shall be carried out as per Standards set out in Chapters 19 to 24.

17-2. Amendments to General Standards or Area Standards
17-2.1. MP&ECD shall, on its own initiative or on requests by others, review, revise recommend or add additional general standards. area standards and detailed plans for adoption after giving public notice in the manner as prescribe in these Regulations.

17.2.2. Such amendments and additions shall be deemed to be part of these Regulations, which shall be published in the official Gazette and shall come into force upon such publication.

17-2.3. In making its recommendations MP&ECD shall apply the criteria specified in Clause 3-3.8, as may be appropriate.

17.3. Declaration of Interim Control Areas
17-3.1. MP&ECD, after the approval of the Government may, by notification, declare a specified area to be an Interim Control Area for any one or more of the following purposes:-

17.3.1.1. to prevent haphazard and unplanned development in areas lacking adequate.

a) water supply se facilities;
b) utilities; electricity, gas telephone;
c) health education or other municipal services or facilities:
d) road networks and public transport,

17-3.1.2. to encourage land development in areas Identified by the Development Plan as urban growth centres and discourage land development in other areas not so identified;

17-3.1.3. to allow sufficient time for the preparation of a concept plan. contingency plan, interim special area concept plan, urban renewal plan or detailed plan for the area, where deemed necessary, to ensure coordinated development of the area;

17-3.1.4. to prevent land development which might be incompatible with a specified major public development programme, subject or scheme, including an urban renewal scheme;

17-3.1.5. to prevent waste in the use of, or otherwise preserve or protect, natural resources, and any other resources, investments or installations of a public agency;

17-3.1.6. to otherwise promote the implementation of the Karachi Master Plan or a concept plan or other development plan.

17-3.2. Except as otherwise provided in sub-clause 17-3.3. the declaration shall prohibit the sub-division of land or any other land development, and bar the granting of development permits thereof in the interim control area during such period or until the occurrence of such aspect as shall be specified in the notification.

17-3.3. The declaration shall not apply to:-

17-3.3.1. Any types of land development specifically exempted in the notification;

17-3.3.2. land development for which a development permit was granted prior to the date of the notification and which remains valid;

17-3.3.3. Land development lawfully commenced prior to the date of the notification, where:

a) development permission was not a prerequisite to the commencement of development,

b) the developer applies to MP&ECD for a special development permit to allow the continuation of the work, and
c) upon such application the developer demonstrates to the satisfaction of MP&ECD that substantial land development work was performed prior to the date of the notification and that he would suffer a severe economic loss if the interim control area declaration were applied to such land development;

17-3.3.4. Land development by a public agency which has been approved by MP&ECD as not being incompatible with the purposes of the declaration.

S.No

Name of Organization

Purpose

Areas

1

Master Plan & Environmental Control Department

(a) Agriculture and its related fields including water resources development and management

Malir Green Belt, Dehs Landhi, Thano, Malh, Darsano, Channo, Baazar, Sanhro, Khakhar Kherkero Konkar.
Gadap Green Belt, Dehs Tor Korangi Green Belt Sharabi Philahi

(b) Mining and quarrying

Tappo Darssano Channo Dehs Dhandho, Kotiro Tappo Manghopir
Tappo Gabopat Dehs Moach Malir Thado Sukkan, Lyari Gujhro and Orangi river beds, where thickness of gravel is more than 25 ft (7.61m)

(c) General Approval of Development Permits

Shahrae Faisal
M.A. Jinnah Road
Abdullah Haroon Road
Zaibunisa Street
I. I. Chundrigar Road
Main Clifton Road
All new complexes like Hotels recreation and shopping centers, costing more than 3 crores of rupees

(d) Tourism and Recreation

Dehs Lal Bhakar, Moach, Ibrahim Haidri, Manghopir, Deh Bund Murad, Deh Rehri, Angario, Pipri, Bonai Bakran.
Creeks Korangi Kadiro, Gharo Charah, Phitti and China creek.
Malir green belt All Dehs in Green Belt.

CHAPTER 18 – SUB-DIVISION AND AMALGAMATION OF LAND
AND CHANGE OF LAND USE

18-1. Major Sub-division And Minor Sub-Division
18-1.1. Major Sub-division means any sub-division including sub-division of 2.47 or more acres (1 hectare), or any size sub-division requiring any new street or road, or the extension or addition of substantial new public facilities, or any sub-division of plot.

18-1.2. Minor sub-division means any sub-division containing less than 2.47 acres (1 hectare) fronting an existing street, not involving any new Street or road or the extension of or addition of substantial new public facilities.

18-2. Conditions for Special Development Permits for Major Sub-Division
18-2.1 In addition to conditions prescribed under 3-3.8 in granting a Special Development Permit upon approval of a major sub-division plan, MP&ECD may:

18-2.1.1. impose land use restrictions compatible with an applicable detailed plan, contingency plan. or planning positions;

18-2.1.2. require such restrictions, or others, to be incorporated in leases or sub-leases granted to plot holders:

18-2.1.3. require the applicant to secure the concerned public agencies and lessees of plots against defaults by the applicant in meeting his obligations to make improvements on the site, or any other obligations the applicant may undertake, or the planning agency may impose, to protect the interests of lessees or sub-lessees.

18-2.2. Where the development of the site of a major sub-division is to occur in phases, MP&ECD may grant a Special Development Permit for the first phase, and provisional permits for a later phase or phases which may become effective only upon further review of the development and which shall be subject to- such revision as MP&ECD shall deem necessary following such review.

18-2.3. MP&ECD shall limit the validity of a Special Development Permit for a major sub-division to such period as it may deem reasonably necessary to complete the development or specified stage of development and if at the end of such period the development or stage is not completed the Special Development Permit shall lapse unless extended on application.

13-2.4. it shall be unlawful for any person to erase, alter, or modify any development permit issued by the Concerned Authority/MP&ECD including the application thereof or any plans or drawings accompanying the same.

18-2.5 The issue of a development permit shall not absolve the applicant from complying with other statutory provisions.

18-2.6. Any development permit issued shall be void twenty four (24) months after the date of issue or the period fixed unless extended on application.

18-3. Sub-Division and Amalgamation of plots
For the sub-division and amalgamation of plots in the approved schemes and areas, the criteria laid down below shall be followed.

18-3.1. Sub-Division of Plots:
18-3.1.1. Sub-division of any residential commercial and industrial plots shall be allowed by the Concerned Authority in case of minor sub-division and with the approval of MP&ECD in case of major sub-division as per the rules set forth in these Regulations.

18-3.1.2. Plots earmarked for flats shall not be considered for sub-division in to smaller plots.

18-3.1.3. Sub-division of residential plots will only be considered to the extent that sub-divided plot shall not be less than 400Sq.yds.(336.13 sq.m).

18-3.1.4. Sub-division of commercial plots will only be considered to the extent that sub-divided plot shall not be less than 400 sq yards (336.13 sq.m) having a minimum frontage of 60ft.(18.27m). The FAR of the original plot, COS and orientation of the original plot shall be allowed.

18-3.1.5. In case of industrial plot a sub-divided plot shall not be less than l000 sq.yds (840.3 sq.m) or 25% of its original allotted size whichever is greater.

18-3.1.6. Parking requirement for commercial plots shall be calculated in proportion to the requirement of the original size of plot.

18-3.1.7. No sub-division of a plot shall be considered without each of the sub-divided parts having a direct approach from a planned road /street.

18-3.1.3. Building regulations of the respective category of the plots shall be applicable to the subdivided plots to the extent that the COS will remain the same. However a five feet (1.5m) minimum open space shall be provided on both sides of the sub-dividing lines.

18-3.1.9 For built-up plots a demolition permission will be produced before allowing sub-division.

18-3.1.10. City Area

(a) Civil Lines, Frere Town. Clifton, Queens Quarters, and Bath Island Quarters.

Area of the sub-divided plot shall be from 477 Sq.yds.(401Sq.m) to 952 sq yds. (800 sq m)

(b) Garden East and West, Tahilram and Lawrence Quarters (as per Govt. Garden Quarters Scheme No. II)

Minimum Area of the sub divided plot shall be 952 Sq.yds: (800 Sq. m)

(c) Jamshed Quarters and Muslimabad.

Minimum Area of the sub-divided plot shall be 571 Sq.yds.

(d) Railway Quarters, Serai Quarters, Ghulam Hussain Qasim Quarters,
Bunder Road Quarters, Old Town Quarters,
Wadhumal Odharam Quarters,
Market Quarters, Napier Quarters, Ranchore Quarters, Ramswamy Quarters Preedy Quarters, Rambagh Quarters, Saddar Bazar Quarters, Harchand Rai
Vishamdas Quarters. Keamari Quarters.

Minimum area of the sub-divided plot shall be 142 Sq.yds. (120 sq m) & minimum frontage 30ft. (9m)

18-3.1.11. For Katchi Abadis the Concerned Authority, with the approval of MP&ECD may allow subdivision.

18-3.1.12. No relaxation of these rules shall be allowed in respect of the sub-divided plots.

18-3.2. Amalgamation of plots:
18-3.2.1. Amalgamation of two or more residential plots shall be allowed by the concerned Authority with the concurrence of Master Plan & Environmental Control Department upto an area of amalgamated plot maximum of 1200 Sq.yds.(1008 sq.m) provided land grant/allotment conditions of the plots are similar. The above limits do not apply to the plot other than residential.

Seven copies of proposed amalgamation plan shall be submitted with the signature of Town Planner, and owner for approval.

18-3.2.2. Rules of the original category of plot shall be applicable on the amalgamated plot Where there is no. similar category of plots, the terms and conditions shall be determined by the Master Plan & Environmental Control Department.

18-4. Change of Land use:
18-4.1. Change of land use of amenity: No amenity plot reserved for the specific purpose shall be converted or utilized for any other purpose.

18-4.2. Change of land use of Residential plots:

18-4.21. No residential plot shall be converted into any other use except with the approval of MP&ECD after the recommendations of the Concerned Authority

18-4.2.2. The applicant shall apply and pay necessary fee to the concerned authority for change of land use of the plot with full justification, which shall examine the application in the light of the planning of the area and forward it to the MP&ECD for consideration.

18-4.2.3. The MP&ECD shall also issue a public notice for the change of land use of the plot I plots in accordance with the provisions of these Regulations and the expenses shall be borne by the applicant.

18-4.2.4. The MP&ECD. shall give due consideration to the objections from the Public before the 1ina decision.

18-4.2.5. The applicant shall pay the prescribed fees and other charges to MP&ECD.

18-4.2.6. Final NOC (No Objection Certificate) shall he issued by the Concerned Authority, after approval of MP&ECD.

18-4.2.7. Industrial plot cannot be converted into residential and commercial use except for Petrol Pump and CNG Station with the approval of MP&ECD on payment of charges.

18-4.2.8. Residential plot within a residential neighbor can be allowed to be used for education by the MP&ECD after inviting public objection from immediate neighbourhood in consultation with Transport Department.

18-4.2.9. Plots designated for use as cinema may be allowed to used upto 25% of the permissible covered area for commercial activity in a (multiplexes) provided the remaining 75% continues to be used exclusively for cinema.

18-5. Commercialization of plots:
18-5.1.1. Conversion of residential plot into Commercial shall be allowed only according to a uniform commercialization policy formulated and revised from time to time by Master Plan & Environmental Control Department with approval of Government and notified in Sindh Government Gazette on the basis of comprehensive study of various urban areas under pressure for commercialization. Individual plots outside the policy will not be c red for commercialization.

CHAPTER 19 – GENERAL STANDARDS: LAND USE
CLASSIFICATION

General

19-1.1. As used in this land use classification, as elsewhere in these Regulations, the term ‘includes or including indicates that the listed items are intended to be illustrative and not exclusive.

19-1.2. Where land includes mixed uses, the designations of the various uses classes may be combined as appropriate (e.g. “commercial-cum-residential”).

Urban Use – Residentiary

19-2.1 ” Residential uses includes all land used for dwelling facilities, but does not include land used for lodging facilities operated on a commercial basis

19-2.2. Other residentiary uses:

19-2.2.1. Government Uses: includes the use of land for all governmental purposes such as offices, post offices, police stations, jails and foreign missions other than uses specifically included in other classifications.

19-2.2.2. Health and Welfare Uses: includes land used for health and social welfare services such as health centre, medical & dental clinics, hospitals, maternity homes, medical research institutions, nurseries, mother and child care centres, homes or other institutions for physically disabled persons, mental institutions, homes for the elderly, and veterinary clinics/hospitals including green areas and open spaces essential for the proper functioning of such institutions.

19.2.2.3. Education uses: includes all land used for nursery schools, kindergartens, primary schools, secondary schools, high schools, colleges, special colleges. technical colleges, universities, research institutes, madressah, all such institutions related with education purposes (other than medical), and fine arts institutes, including green and open spaces essential for the proper functioning of such institutions.

Note: The sites reserves for education use can not be convert into any other use.

19-2.2.4. Assembly Uses: includes all land used for libraries, cinemas, theatres, concert halls, planetaria, aquaria (if outside of zoo), non-sportive clubs, exhibition halls, and exhibition grounds etc. With the exception of exhibition grounds, open areas of these facilities will be limited by their actual operational needs.

19-2.2.5. Religious uses: includes all land used by mosques, jamaat khanas, monasteries, churches, synagogues, shrines, temples, dargahs, imambargahs, and tombs including ancillary green and open spaces belonging to the religious body owning the land.

19-2.2.6. Commercial (trade) uses: normally includes only the land used for the activity in question, though this may be increased by additional open or green space, if the operation of the facility concerned requires it. Commercial (trade) uses includes:

a) whole sale trade: subzi mandi, fruit mandi, whole sale markets.

b) retail shopping: including shops, shopping centres, department stores, bazaars, markets and hawkers areas juma bazar etc.;

c) personal services: including barbers, hair-dressers, baths, tailoring, shoe-making, laundries and dry cleaners;

d) catering: including restaurants, banquet marriage hall/lawn, refreshment stalls, buffets

e) lodging: including hotels, motels and clubs providing lodging:

f) business offices including banks;

g) petrol stations, , CNG station.

h) Cyber Cafe etc.

19.2.2.7. Parks and playgrounds: includes:
all green spaces, including various related cultural or recreational facilities such as greenhouses, zoological and botanical gardens and their related feasibility, toilet for both sex and fist aid facility, but excluding green spaces ancillary to welfare or educational facilities, and excluding median or other dividing green strips in road rights-of-way:

19-2.2.8. PLAY GROUND
a) All open spaces designated for all indoor or outdoor sports activities of all types whether fully developed or not: and
b) All structures serving sports activities, like sports
complex, gymnasia. swimming pools, stadium, race-courses, sports clubs of all kinds, whether they are part of an open space designated for sports activities or are independent structures.

Note: Spaces reserved for parks and play grounds shall not be converted for any other amenity or for any other use.

19-2.2.8. Burial grounds: includes graveyards of any religious denomination, Towers of Silence and crematoria.

19-2.2.9. Transportation right-of-way: includes highways and refer roads with service road and streets, parking and loading areas therein, green belts, and pedestrian lanes.

19-2.2.10. Parking: includes driveway, parking spaces, bus bays, parking lots, ramps and buildings used wholly for parking purposes.

19-2.2.11. Residentiary manufacturing: those industries in which the process carried on or the machinery installed are such that it could be carried on or installed in any residential area without detriment to the environment or pleasant circumstances, features and advantages of the area as specified in Regulation No.25-6.1.

19-2.2.12. Aquatic Recreational Areas: Sea coast, lakes, rivers, ponds, water falls, boating basins, marine promenade, marine clubs, yachting clubs, Urban uses – Non residentiary.

19-3. Urban uses- Non residentiary
19-3.1. Manufacturing Uses: includes all industrial activities other than cottage industries and may be sub-divided into:
19-3.1.1. large-scale manufacturing/ heavy industry.
19-3.1.2. small-scale manufacturing/light industry.
19-3.2. Wholesale uses: includes all warehousing, godowns and wholesale markets.

19-3.3. Construction: includes yards of construction firms, open storage of construction materials, pre -processing of constructional materials, and small pre-fabrication plants serving particular construction projects, but does not include a site under construction which is intended for another ultimate use.

19-3 4. Utilities and Municipal Service facilities includes all facilities for utility services, excluding those parts of utility networks that are under or above transportation rights-of-way. Utilities and municipal services facilities may be included.
19-3.4.1. Water supply: including protected water resource areas water purification plants, pumping stations water mains, water conduits-rising mains and water reservoirs;

19-3.4.2. Sewerage: including treatment plants, sewage farms, oxidation ponds, sludge ponds outside industrial enterprises, pumping stations and main trunk sewers:

19-3.4.3. Solid waste disposal: including composting plants incinerator and general or special dumping grounds and la sites;

19-3.4.4. Electricity: including power stations, step-down stations. transformers in separate structures, and high-tension lines.

19-3.4.5. Gas: including gas works, pressure reducing stations and main gas conduits;

19-3.4.6. Communication: including Radio wireless stations, boosting stations and telephone exchanges etc.

19-3.4.7. Others: including storm water drains, flood embankments fire-brigade stations, depots of public works supplies and equipment. and civil defence depots.

19-3.5. Transportation terminals: includes airports, harbours, railway stations and yards, bus depots, truck terminal stands and tramway depots and terminals.

19-3.6. Protection Zones: includes buffer areas around industrial facilities or transportation terminals and river beds, which must be kept vacant to protect nearby uses from such facilities or terminals but does not include buffer areas suitable for agriculture.

19-4. Semi-Urban Uses
19-4.1. Vacant improved land includes land reclaimed for development such as through the provision of major roads and trunk utility lines, but not yet developed.

19-4.2. Restricted land: includes land the use of which is governed by national security regulations.

19-5. Non-Urban Uses
19-5.1. Agriculture and Forestry Uses:

19-5.1.1. Agricultural lands: includes arable lands, Poultry Farm, pastures and grazing grounds and orchards.

19-5.1.2. Woodlands: includes Woods, forests and tree nurseries.
19-5.1.3. Fishing: includes fish harbours fish ponds and fish farms or- hatcheries.

19-5.1.4. Irrigation: includes irrigation canals, ditches and dykes.

19-5.2 Mines and quarries
19-5.3. Salt pans.
19-5.4. Non-Urban Vacant:

19-5.4.1. Developable, vacant: includes vacant land, whether developable for urban or non-urban use, other than vacant land under.

19-5.4.2. Residual Vacant Land: including areas prone to risks/hazards detrimental to human lives, all land not capable of development, including land subject to annual flooding.

19.5.5. Water bodies, sea, lake, pond, rivers.

19.5.6. Tourist resorts/Holiday Towns and Historical sites.

CHAPTER 20 – GENERAL STANDARDS: BULK AND SPATIAL

20-1. Plot Areas
20-1.1. For all new major sub-division schemes, the following standard plot areas shall be observed:

20-1.1.1. Minimum plot area of 80 Sq.yds.(66.89Sq.m.).

20-1.1.2. plot greater than 81 Sq.yds.(67.7Sqm.) and not more than 120 Sq.yds.(100.33 Sq.m).

20-1.1.3. plot greater than l2l Sq.yds.(101.l7 Sq.m.) and no more than 240 Sq.yds. (200.67 Sq.m.).

20-1.1.4. plot greater than 241Sq.yds.(201.5Sq.m.) and no more than 400 Sq.yds. (334.45 Sq.m.).

20-1.1.5. plot greater than 4OlSq.yds.(335.28Sq.m.) and not more than 600 Sq.yds. (501.67 Sq.m.).

20-1.1.6. Flat site: not less than 2420Sq.yds. (2023.4 sq.m).

20-1.1.7. commercial plots not less than 60 Sq.yds.(50.42 Sq.m).

20-1.2. Concerned Authority, in their areas of jurisdiction, may set higher minimum levels, but may not reduce them beyond the sizes defined above.
20-1.3. The determinations by the Concerned Authority of plot sizes shall be referred by such agencies to MP&ECD for its comments, and in the event of differences, the MP&ECD determination shall prevail.

20-2. Plot Shape
Plot shapes shall generally be rectangular quadrangles; provided, however, that where this would cause practical difficulties arising from irregular or Unique features of a plot, the development may apply for an exception. In any case:-

20-2.1. The ratio of frontage to depth of residential plots shall be no less than 1:1 and no more than 1:3.

20-2.2 Minimum width of residential/commercial plot shall not be less than 20ft. (9 m.).

20-3. Density Standards

20-3.1. Definitions:

20-3.1.1. Residentia1 density means the average number of persons residing on 1 acre (4067.22 sq.m) of residential area. For the purposes of this clause residential area means an area devoted to residential uses, as defined in clause 19-2.1; and does not include streets or lanes or other residentiary uses defined in Clause 19-2.2.

20-3.1.2. Residentiary density means the average number of persons residing on or occupying 1 acre of residentiary area. For the purposes of this clause residentiary are means an area devoted to residentiary uses, other then residential uses, as defined in clause 19.2.2.

20-3.2. The following residential density requirements shall apply:-
20-3.2.1. To the indicated types of housing development:

a) on 80 sq.yds (66.89 sq m) plots: no more than 500 persons per acre (0.404 hectare) of residential area;

b) on plots greater than 8l Sq.yds.(67.7 sq.m) to 120 Sq.yds plots: no more than (400) Four hundred persons per acre (0.404 hectare) of residential area;

c) on plots greater than l2l sq.yds.(101.l7 sq.m) to 240 Sq.yds.(200.67 sq.m) plots: no more than (300) Three hundred persons per acre (0404 hectare) of residential area:

d) on plots greater than 241 Sq.yds to 400 sq.yds.(334.45 sq.m) plots: no more than (200) two hundred persons per acre (0.404 hectare) of residential area;

e) on plots greater than 401 sq yds.(335.28 sq.m) to 600 sq.yds.(501.67m) plots: no more than 150 persons per acre (0404 hectare) of residential area;

20-3.2.2. Flats for low income groups: no more than (650) six hundred fifty persons per acre (0.404 hectare) of residential area;

20-3.2.3. Flats for medium income groups: no more than 500 persons for acre (0.404 hectare) of residential area:

20-3.2.4. Flats for high income groups: no more than (325) three hundred twenty five persons per acre (0.404 hectare) of residential area.

20-3.3 For developed areas

20-3.3.1. In areas already, substantially developed, where the requirements of sub-clause 20-3.02 are inappropriate for either the development of vacant areas or redevelopment of deteriorated built-up areas, the Concerned Authority may approve less restrictive. density standards for residential development with the approval of MP&ECD provided, however that the Concerned Authority in making such determinations takes into account the following factors:

a) the number and size of the dwelling units to be constructed;

b) the pattern of existing housing development in the neighbourhood;

c) the terms and conditions and restrictions of the land grant conditions governing the development:

d) the potential improvement of hygienic conditions in relation to available capacity of utility infrastructures and sanitation facilities; and

e) the health, safety and general welfare of the residents of the community of which the development is a part. .

20-3.3.2. In the case of redevelopment schemes, the Concerned Authority shall refer its determinations of such density requirements to MP&ECD and such requirements shall be subject to MP&ECD approval.

20-4. Land Allocation
20-4.1. Allocations for various land uses for new residential schemes shall be as follows.

20-4.1.1. Residentiary area for residential uses as defined 19-2.1 shall be allowed upto maximum 55% of the total area of land.

20-4.1.2. Commercial area for commercial uses as defined in sub-clause 19-2.2.6 shall be allowed upto maximum 5% of the total area of land.

20-4.1.3. Amenity area for other residentiary uses shall be as under:
a) Roads/Streets, right of way minimum 22% of the total area of the land.

b) Parks minimum 5% of the total area of the land.

c) Play Grounds minimum 5% of the total area of the land.

d) Public uses including religious uses such as mosque, lmam-Bargaas, etc. minimum 5% of the total area of the land.

e) Educational uses minimum 3% of the total area of the land.

20-4.2. Allocations of land for new industrial towns and estates for large and medium size industries shall be as follows:

20-4.2.1. Industrial area as defined in 19-3.1.1 shall be allowed upto maximum 70% of the total area of (and.

20-4.2.2. Commercial area as defined in sub clause 19-2.2.6 shall be allowed upto maximum 1% of the total area of land.

20-4.2.3. Amenity area for other residentiary uses shall be as under:
a) Roads/Streets, right of way minimum 20% of the total area of the land.

b) Parks/Play Grounds minimum 3% of the total area of the land.

c) Public uses including Educational and religious uses minimum 6% of the total area of the land.

20-4.2.4. On industrial plots of 5 acres and more large industrial plots, 8% of the total plot area in the rear shall be allowed for residential, local commercial, amenity, road etc. within the premises for labour and staff for which a separate approach shall have to be provided. The minimum distance between the factory and residential units shall be at least 40 ft. (12.18 m.).

20-4.2.5. In any industrial area, no road shall be less than 50 ft. (15.22m) in width for areas allocated for large and medium industries and no less than 40 ft. (12.18m) for area allocated for small industries.

CHAPTER 21 – GENERAL STANDARDS: HIGHWAYS,
MAJOR ROADS, BOULEVARDS, STREETS AND LANES

21-1. Pedestrian Lanes

21-1.1. Thoroughfares intended exclusively for pedestrian traffic, referred to as “pedestrian lanes”, shall be at least 10 ft.(3m) wide, as given in Figure-I.

21-1.2. Pedestrian lanes, if abutting plots on both sides, shall have uninterrupted length not greater than 30 times its width provided that interruption shall be created by other pedestrian lane or vehicular street.

21-1.3. The grade of pedestrian lanes in cross-section shall be level, and their longitudinal slope may not be greater than 5º, provided however, that:-

21-1.3.1. If the slope of the terrain is greater than 5°, the difference in slope may be made up by an appropriate number of steps; the series of steps for each 5° higher slope shall be separated by a landing at least 6.5 ft. (1.97m) wide also there should be a ramp for wheel chair.

21-1.3.2. If the lane is along double or single rows of plots in a terrain sloping more than 5%. the difference in slope may be made up by an appropriate number of steps at the bottom end of each double or single row or plots, as the case may be also. Also there should be ramp for wheel chair for special person.

21-2. One-Way Streets (Types A, B, C)

21-2.1. As shown in FIGURE-2, Typical Street Cross-Sections appended to this Part, Street Types A. B, and C shall be one-way streets

21-2.2. Minimum width of one way street shall be 24ft. (7.31m with parallel parking on one side only.

21-2.3. One-way streets shall be intersected by vehicular streets at least every 500 ft.(152m).

21-3. Two way Streets (Types D, E, F, G)

21-3.1. Minimum width of two way street excluding parking shall be 40ft. (12.18m).

21-3.2. Street Type E (FIGURE-2) shall be so designed and maintained as to permit parallel parking on one side only.

21-4. HIGHWAYS, MAJOR ROADS AND BOULEVARD (TYPES-H, I & OTHERS)

21-4.1. For Highways and major roads of not less than 100 ft. (30m) right- of-way a permanent service road shall be provided on each side of the Highway/Boulevard.

21-4.2. The width of side walks (a) shall depend on the pedestrian traffic
volume.

21-4.3. New width of green strip (b) in roads will depend on the nature and dimension of the utility lines to be laid under them.

21-4.4. The width of the green median shall be at least 10 ft. (3m) as to provide adequate pedestrian refuge island at crossing but where necessary such strips may be released by separate train/LAT right-of-way.

21-4.5: No direct access to highway or major roads will be allowed except through a service road at appropriate distances.

21-4.6. Bus bays/lanes on all major roads shall be provided in consultation with Transport Department.

21-5. Visibility at Cross Roads

21-5.1. In the interests of pedestrian safety aria vehicular traffic visibility at cross roads, no trees or any other impediment/structure will be planted within 30 ft.(9.1 3 m) of any street right-of-way limit.

21-5.2. For the same: purposes, except as otherwise provided in sub- clause, the borders of streets shall be champhered at such distances from their crossing as provided in sub-clause 25-1.02.

21-6. Street Lines and Building Lines

21-6.1. Street rights-of-way lines shall be regarded as distance between building lines of two front buildings except where building setback lines are established, pursuant to these Regulations or otherwise.
21-6.2. No structure or part of a structure of ground floor may project beyond such building line or building setback line.

CHAPTER 22 – GENERAL STANDARDS:
INDUSTRIAL DEVELOPMENT

22-1. Scope

22-1.1. For the purpose of these Regulations, the terms industrial uses industrial purposes, industrial activities and industrial development include:

22-1.1.1. the making or manufacturing of any articles or part of any article;

22-1.1.2. the altering, fabricating, ornamenting, finishing, compounding, assembling, blending, mixing, packing or canning, adapting for sale, or breaking up or demolition of any article;

22-1.1.3. the extraction, dressing, treatment or preparation for sale of minerals, or the extraction or preparation for sale of oil;

22-1.1.4. any other activity which has been designated as industry by the Federal Government or Government of Sindh through a notification.

22-1.2. For the purposes of these Regulations, industries are classified as “residentiary manufacturing” and “non-residentiary manufacturing” (Chapter 19).

22-2. Permits for Industrial Development

22-2.1. No land development for industrial purposes may be undertaken without a Special Development Permit from MP&ECD, except in the case of residentiary manufacturing for which a General Development Permit may be obtained from the concerned Authority upon compliance with the requirements of an applicable detailed plan, any area standards and any other pertinent requirements or regulations.

22-2.2. The concerned Authority determining an application for a development permit for industrial purposes may grant the permit with consultation of MP&ECD only if it is satisfied that the applicant has complied, or will comply, with:

22-2.2.1. the performance standards set forth in this Chapter;

22-2.2.2. any applicable bulk, height, area or other standards specified in Chapters 19 to 21 or in Appendices A to E;

22-2.2.3. the requirements of any applicable detailed plan or planning position;

22-2.2.4. any applicable requirements of other laws, regulations or bye-laws for licensing or regulating industrial uses or operations for the protection of the environment, or of health and welfare of residents of the community.

22-3. Criteria for Special Development Permit for Industrial purposes

22-3.1. In determining an application for a Special Development Permit for industrial purposes, the MP&ECD shall apply the following performance standards, as may be appropriate:

22-3.1.1. Removal of Wastes: The applicant shall submit plans for the removal of liquid and solid wastes from the site in such manner as shall avoid or minimise the pollution of nearby water courses or sources, sewers, or water supply facilities, or damage to sewer lines or sewerage treatment plants; and the developer and operator shall comply with such conditions as the MP&ECD may impose in respect of the disposal of Industrial waste.

22-3.1.2. Removal of noise and vibration: The applicant shall give the details of noise and vibration generation in the industry and/or its control, and shall avoid or minimise the noise and vibration generation; and- the owner and operator shall comply with the conditions set down by the MP&ECD.

22-3.1.3. Access and loading: Facilities for vehicular access and unloading shall be adequate for the particular industrial activities, and be so designed and located as to ensure safety and eliminate fire hazards.

22-3.2. In addition to the requirements of paragraph 22-3.1, the MP&ECD shall give consideration to the following, as may be appropriate:

22.3.2.1. the location of the site and whether it is designated for industry in an applicable detailed Master plan or development plan;

22-3.2.2. implications for road and rail traffic and traffic congestion;

22-3.2.3. the precise nature of the industrial process in relation to its impact on the environment, especially, though not exclusively, in reference to the emission of fumes and dust and creation noise;

22-3.2.4. the potential burden on utilities i.e. water, sewerage, electricity, gas, telephone etc;
22-3.2.5. if sought to be located in a rural area, whether the activity is the processing of agricultural products or is otherwise traditionally conducted in rural areas; and in any event, whether the proposed industrial development is likely to invite urban development in the area and, in particular, pressures on green belt areas:

22-3.2.6. the particular needs of the industry, such as the need to be near water, docks or a source of raw materials.

CHAPTER 23 – GENERAL STANDARD:
COASTLINE RECREATION DEVELOPMENT

23-1. Interim control area:
As per the Karachi Coastal Recreation Development Plan entire 40 mile strip of Karachi Coastline right from Hub River estuary passing through Paradise Point, Hawkesbay, Manora and Western back water, Eastern back-water and Clifton; Gizri Defence and Korangi Creek Phitti Creek, Kadera Creek and right upto Ghara Creek is an interim control area for the purpose of recreation and tourism.

23.2. Sectors of Karachi Coastal Zone:
The Karachi Coastal zone is divided into following sectors:
A. From Hub River estuary upto Paradise Point.
B. From Paradise Point upto Hawkesbay.
C. From Hawkesbay to Manora including western back-water.
D. Clifton including western back-water of China Creek
E. From Clifton to Gizri Creek upto Malir River Estuary.
F. Korangi Creek, Phitti Creek, Kadero Creek and Gharo Creek.

23-3. Environmental Planning Zones:
The following environmental planning zones as per the Karachi Coastal Recreation Development Plan should be considered while planning a recreation scheme within coastal area.

23-3.1. Conservation area:

23.3.1.1. Where no infra-structural development is required for access.

23.3.1.2. Where controlled/Limited infrastructural development may be allowed and public access may also be allowed. These include following areas along Hawkesbay and Sandspit and Manora Beach: green turtle mangrove swamps, coral reef, oyster beds, Rock Pools and bird roasting and nesting sites.

23.3.2. Utilization Area:
23.3.2.1. This is a sensitive area affecting other areas. The natural character of the area should be maintained or improved.

23.3.2.2. There are areas which are suitable for development.

23.3.3. Area of concern:

23-3.3.1. It is a developments and condition affecting area. Improvement in this area may be beneficial.

23.3.3.2. Future developments may affect area, hence control is required.

23.3.4. Restricted zone:
23-3.4.1. Access is restricted within a radius of 1.24 miles (2 Km) of KANUPP. No development is allowed.

23-3.4.2. Public access may be allowed but no permanent structures may be constructed.

23-4. Utilization Area (Areas for planning)

23-4.1. Those areas are suitable for development area marked as 3b.
The coastal areas need special consideration both from the point of view of safety and to maintain their simple natural beauty which is the principle ingredient in their attraction to day-tippers and holiday makers. Expert views in the field of planning, architecture, oceanography, geography, engineering, environmental sciences and laws to be applied.

23-4.2. The following aspects may be given special consideration in planning:

23-4.2.1. Ample space between property line and high water line.

23-4.2.2. Ample beach space per person.

23-4.2.3. Location of car parking area away from the beach area.

23-4.2.4. Design of marinas and pairs etc. may not hamper free flow of tides.

23-4.25. Prepare arrangement for garbage collection, waste water disposal etc.

23-4.26. Safety measures to check pollution of the sea by beach activities.

23-4.27. Safety measures such as life and medical aid.

23-4.28. Arrangement for fire fighting, alarming system in case of tidal waves, cyclone etc.

23-5. Building Regulations
Each Recreation and amusement project requires special design compatible with most modern facilities and buildings in other parts of the world, both for holiday makers and for local and foreign tourists for development of tourism. A proper feasibility of the project is to be drawn by the Consultants covering alt aspects and the maximum gross density should not exceed 25 persons per acre.

23-5.1. Sanitation and drainage facilities will be provided to the maximum efficiency for the disposal of waste water and removal of solid waste without polluting the Coastline.

23-5.2. As a special feature any other special element, building equipments may be allowed. Innovative structures and buildings of special architectural character may be allowed..

23-5.3. Following land use composition shall be allowed for recreation project:

% of total Acres/hectare

23-5.3.1.

Boarding and lodging area

20

23-5.3.2.

Open area with landscaping for recreation

70

23-5.3.3.

Circulation roads and Car Parking Area

10

23-5.3.4.

A plot ratio of 1:1 shall be used for all buildings for hotels, motels, amusement halls

23-5.3.5. Recreation project may include hotels, motels for boarding and lodging, restaurant, marina clubs, swimming pools, casino, yachting clubs, boating basins,
Dolphin Parks and other modern types of amusements and water based recreation without damaging the natural environment of the Coastline.

23-5.3.6. Large open space for car parking along the approach road will be provided. proper car parking facilities will be designed.

CHAPTER 24 – PARKING REQUIREMENTS

24.1. Scope
Parking requirements for motor vehicles specified in these Regulations shall apply when so ever:-
24-1.1. A new building is constructed or a change of use of existing building is established:
24-1.2. An existing building is altered and there is an increase in the floor area of the building, then additional parking requirement shall be totally applicable to the proposed addition only within the property limits as required under these Regulations.

24-2. General Conditions
24-2.1. The parking space, including ramps, shall not be included in FAR.

24-2.2. Total parking space requirement of every building shall be determined as a sum of parking requirement for each type of use to which the building is subjected.

24-2.3. Minimum clear height of parking structure without obstruction shall be
7′-6″ (2.28m).

24-2.4. Detailed plan clearly showing entry, exit, gradient of ramp turning radius, storage spaces, circulation and movement of vehicles etc. shall be submitted.

24-2.5. 16% of the total car parking. space will be utilized to provide space for Motorcycle parking @ 6 Motorcycles and 8 bicycles for every one car.

24:2.6. Minimum one out of every 50 car parking stalls shall be dedicated for the disabled persons at most convenient location.

24-2.7. When units of measurement used in computing the number of parking spaces result in the requirement of a fractional space. the nearest whole number to next higher side of parking spaces shall be taken.

24-3. Car Lifts

24-3.1. Where car lifts are provided there shall be a minimum of two car lifts with facilities of standby generator where-ever so required.

24-3.2. Minimum one car lift wherever so required with standby generator shall be provided for every 40 cars, if parking level is at more than 40ft.(12m) in height from road level.

24-3.3. One car lift with standby generator shall be provided for every 50 cars, if parking level is up to 40ft.(12m) in height.

24-4. Application of Parking Requirements
24-4.1. Minimum one motor vehicle parking space shall be provided for:

24-4.1.1. every 6 bedrooms for a hotel of three star category and above. In addition to a per room requirement, parking space shall be provided for all other facilities e.g. restaurants, conference room etc;
24-4.1.2. every 10 beds and or per consulting room of a clinical/medical service building;

24-4.1.3. every 100Sq.ft.(9.29Sq.ni) in places of all public assembly, unless specified as hereunder;

24-4.1.4. every 50 visitors who can be accommodated by an area or structure for sports activities;

24-4.1.5. every 2000 sq.ft.(185 of floor area of office space in an industrial building unit or wholesale use facilities;

24-4.1.6. every 800 sq.ft(75Sq.m) of floor area of space for retail shopping;

24.4.1.7. every 8 seats/occupancy of restaurants or banquet hall.

24-4.1.8. every l000 sq.ft.(92Sq.m) of business office;

24-4.1.9. Every 4000 sq.ft. (371.7Sq.m) floor area of all educational institutions situated on a plot measuring 2000 sq.yds and above,

24-4.1.10. every 60 sq.yds.(50.4 sq.m) of plot area of l000Sq.yds. (840.33Sq.m) marriage lawn/hall;

24-4.1.11. apartment building, residential or residential-cum commercial building – for every l200Sq.ft.(111.52Sq.m) floor area of only residential use, whereas commercial use area shall be governed by above relevant rules;

24-4.1.12. every 3000Sq.fL(27.6&Sq.m) of floor area of Cinema.

24-5. Parking requirements for other uses

24-5.1. In the case of land development structure or facilities where uses do not fit the categories given above, the agency determining an application for a development permit may require the provision of parking spaces to the extent reasonably necessary to promote any of the purposes after due vetting by Transport Department.

24-5.2. In addition to the foregoing requirements the authority determining an application for a development permit shall require the provision of off-street parking spaces for all motor vehicles, including trucks, fork lifter etc. and any animal-drawn vehicles essential for the operation of facilities or enterprises on the premises, and the provision of adequate loading and unloading facilities for industrial unit for supply vehicles so located as to cause the least possible obstruction to the pedestrians as per requirement of Transport Department.

24-5.3. As a condition for the granting of permission for land development involving the laying out of new roads, road widening or road expansion, or otherwise having a significant impact on traffic conditions in the vicinity, MP&ECD may require any of the following:

24-5.3.1. the provision of off-street parking space facilities for terminals for public service vehicles, including buses, taxis, trucks and animal drawn vehicles;

24-5.3.2. the provision within transportation rights-of-way of parking strips, or taxi, carriage, or bus stands, or loading and unloading spaces for supply vehicles: or

24-5.3.3. the incorporation of any other design features necessary to achieve any of the purposes set forth in these Regulations.
I
24.6. Standards for Parking spaces

24-6 1. Configuration of parking space under these Regulations shall conform to the minimum standards given in the table below:

Table – 24.1

Description

For Car

For Motorcycle

By width

8ft (2.43m)

2.5ft (0.75m)

Bay length

16 ft (4.86m)

6 ft (1.8m)

Gradient of ramp

1:7.5

1:8.5

Straight turning radius (outer)
Helical length turning radius
Lot turning radius

24ft (7.3m)
32 ft (9.7m)
17.5 ft (5.3m)

——————–

Minimum ramp and driveway width two way traffic
One way traffic

18 ft(5.5m)
11 ft (3.4m)
as per table 24.2

——————-

i) For ramp gradient with 1:7.5 transition space of 8.5ft. length shall be provided at start and termination of ramp with gradient of 50% of the main ramp gradient.

ii) For total climb of up to 3.3ft.(1m), the above shall be exempted.

Table – 24.2

Angle of Parking
(degrees)

Stall width (ft)

Stall length (ft)

Kerb length per car (ft)

Stall depth (ft)

Min. one way driveway width (ft)

Lot width 1 row + 1 driveway (ft)

Lot width 2 rows + 1 driveway (ft)

0=along kerb

8 (2.4m)

19 (5.8m)

19 (5.8m)

8 (2.4m)

11.5 (3.5m)

19.5 (6.0m)

27.5 (8.4m)

30

8 (2.4m)

16 (4.9m)

18 (5.5m)

15 (4.6m)

12 (3.7m)

27 (8.2m)

42 (12.8m)

45

8 (2.4m)

16 (4.9m)

17 (5.2m)

17 (5.2m)

12 (3.7m)

29 (8.8m)

46 (14.0m)

60

8 (2.4m)

16 (4.9m)

15 (4.6m)

18 (5.5m)

21 (6.4m)

39 (11.9m)

57 (17.4m)

90

8 (2.4m)

16 (4.9m)

8 (2.4m)

16 (4.9m)

25 (7.6m)

41 (12.5m)

57 (17.4m)

24-7. Exemption from Provision of Parking Space
The following types of buildings/plots shall be exempted from provision of car parking space within the premises.

24-7.1. Plots upto 720 sq.yds. (t300.sq.m).

24-7.2. All buildings n plots of odd shapes and dimensions where there is no physical possibility of designing car parking space within the premises. The exemption in such case shall be given by a committee of representative of PCATP, PEC and the C.O.B. of the concerned zone/Area. The appeal against the decision of the Committee may be referred to Oversee Committee and its decision shall be final.

24-7.3. All places of worships.

24-7.4. Educational buildings of tow income area/groups with due vetting by Transport Department.

24-7.5. Orphanage house, buildings for destitute or similar use after the vetting of Transport Department.

24.8: Lighting Standard for Parking Lot

Area Light Intensity (Foot Candle)
Minimum Desirable
Entrance 50-80 80-100
Driving Aisles 8-10 10-15
Over parked Vehicles 3-5 5-10

CHAPTER 25 – ZONING REGULATIONS/AREA STANDARDS

25-1. INTRODUCTION

25-1.1. In addition to the general conditions as specified in clause No.25-1.2. to 25-1.10. special conditions applicable to different categories of plots shall be applicable.

25-1.2. Chamfering for Corner Plots

25-1.2.1. Unless otherwise specified in FIGURE-3, the corners of all plots abutting on two intersecting roads for auto vehicles shall be champhered as follows:

a) From 30ft.(9.0m) to 59ft.(17.9m) width of the road, the distance should be 6ft.(183m);

b) From 60ft.(18m) to 109ft.(33.22m) width of the road, the distance should be 9ft.(2.74m);

c) From 110ft.(33.53m) and above width of the road, the distance should be l5ft.(4.56m);

d) In case building abut on service road the champhered will be governed on the width of the service road.

25-1.3. Projections

25-1.3.1. Boundary walls or any other structures in the front of the plot shall be totally within the plot.

25-1.3.2. For those sides of buildings which abut property tine, no openings, projections or attachments of any nature whatsoever shall be permitted, except for those buildings where property lines abut onto a public street or a permanently open space.

25-1.4. Ancillary structures

25-1.4.1.Area of the car porch in house shall not be included in FAR, upto a maximum of 380Sq.ft.(35sq.m). If car porch is constructed in the front or side COS, maximum: clear overall height shall not exceed 8ft.(2.43m) from the floor level of the plot, and a maximum depth of 2Oft.(6m) shall be allowed along the properly line. No construction or occupancy shall be allowed over it within COS. However, any construction above car porch outside the COS shall be included n the FAR.

25-1.4.2.Staircase tower over the stair shaft shall be allowed with maximum clear height of 10ft.(3m). This area shall not be included in FAR.

25-1.4.3. Guard room of maximum 64Sq.ft(5.95Sq.m) area having maximum height of l0ft.(3m) from centre of the road shall be allowed in the front COS in all type of plots having an area of 400Sq.yds. (335Sq.m3 and above.

25-1 4.4. The loft area upto a maximum height of 5ft.(1.52m) on bathroom and kitchen shall not be included in FAR.

25-1.5. Space between blocks in Residential Plots.
In case where a number of Blocks are designed within the plot boundary, open space between two blocks on front and rear sides of the blocks shall be 50% of the height of the block minimum 30ft.(9m) and a minimum open space between the blocks on other two sides of the blocks shall be 20% and minimum 1 5ft.(4.56m) of the height of the block as illustrated in FIGURE-4 & FIGURE-5.

25-1.6 Landscaped and recreation spaces
25.1.6.1. In all residential and residential-cum-commercial protects for public sale, a minimum of 20% of the mandatory open spaces shall be property landscaped. This landscaped space shall be left open to sky and shall not be used for parking of vehicles.

25-1.6.2. For all public sale/public use/industrial and commercial plots exceeding 600Sq.yds.(502Sq.m) a minimum of 8% of the permissible floor areas ratio shall be provided for recreation facilities/children play area/prayer area. This area shall not be included in the total floor area up to a maximum of 8% of total floor area.

25-1.7. Exemptions from FAR
25-1.7.1. In alt commercial, public sale, public use and industrial buildings the following areas shall be excluded from FAR:
a) Car parking including ramps and driveways.
b) Building services areas, such as sub-station, plant rooms lift shafts, lift machine rooms, electrical and mechanical ducts and electric power generator space.
c) Arcades, if provided.

25-1.8.Height related setbacks of buildings
For all buildings except houses the height of buildings will be such that it would not intersect an imaginary line from the opposite side of the main road serving the building at an angle of 65° with the horizontal. (Not applicable on chimney shaft of industrial buildings, flag masts and communication equipment, FIGURE

25.1.9. Miscellaneous
No workshop for denting, painting or repairing of vehicles shall be allowed on commercial plots. In addition, a building intended to carry out dangerous and offensive trades, trades emitting obnoxious smell, factories and mills which pr noise, smell, smoke or other nuisance shall not be allowed to be constructed on commercial plots..

25-1.10. Height Restriction of the Building.
25-1.10.1. The restricted flying gap and safety zone as prescribed by the Civil Aviation Authority and PAF shall be taken into consideration while determining the height of the building.

25-1.10.2. The height of the building shall not be above the podium level of 91ft.(27.72m) MSL within 3/4 mile(1.2 K.m) radius of Quaid e-Azam’s Mausoleum.

25-2. RESIDENTIAL

25-2.1. Building Bulk Standards All -Residential houses/bungalows shall observe the following standards, except where any of these standards are in conflict with Clause 25-9, in which case Clause 25-9 shall prevail.

PLOT SIZE
(sq yards)

FOOT
PRINT

FAR

MINIMUM
COS FRONT

MINIMUM COS
SIDES

MINIMUM COS
REAR

Up to 59
(49.5m²)

85%

1:2

None

None

l5 sq.ft.
(4.5 sq.m) with min width 3 ft (0.9m)

60-119
(50.4-100m²)

85%

1:2

3 ft (0.9m)

None

Courtyard 5 ft (1.5m) x 5ft (1.5m)

120 to 199
(100.8-167m²)

75%

1:2

3 ft (0.9m)

None

3 ft (0.9m)

200-299
(168.251.3m²)

65%

1:2

5ft (1.5m)

5ft (1.5m) on one side

7 ft (2.13m)

300-399
(252-335.2m²)

65%

1:1.8

5ft (1.5m)

5ft (1.5m) on one side

7 ft (2.13m)

400-499
(336-419.3m²)

55%

1:1.5

7.5ft (2.25m)

5ft (1.5m)

7 ft (2.13m)

500-999
(420-839.5m²)

50%

1:1

10ft (3m)

7 ft (2.1m)

7.5 (2.25m)

1000-1499
(840.3-1259.6m²)

45%

1:1

15 ft (4.56m)

7 ft (2.1m)

10 ft (3m)

1500
(1260.5m²) & larger

40%

1:1

15 ft (4.56m)

7 ft (2.1m)

10 ft (3m)

Note. Plots where original allotment conditions or previous rules provide for higher FAR than the one provided in the above chart (25-2.1) the FAR which are on higher side shall be adopted and numbers of floors shall be allowed in accordance with the allowable quantum of FAR.

25-2.2. Other Conditions

25-2.2.1. Subject to the General Conditions as defined in Clause 25-1.

25-2.2.2 Height of all houses/bungalows measured from Plinth level, but excluding parapet, overhead tank, lift machine room if required staircase tower, and barsati shall not exceed 35ft.(10.66m) or three stories whichever is less (except for category H – plots of 4000 sq.yds and above where height of 72 ft or 6 stories whichever is less will prevail).

25-2.2.3. Plots abutting a public street on the rear shall be exempted from the provision of rear COS up to Plot size of 59Sq.yds. (49.57Sq.m). For plots greater than 59Sq.yds.(49.57Sq.m), the rear COS shall be 50%.

25-3. COMMERCIAL

25-3.1. Building Bulk Standards
All Commercial plots shall observe the following standards, except where any of these standards are in conflict with Clause 25-9 in which case Clause 25-9 shall prevail.

Plot Size (sq yards)

Foot Print

FAR

Minimum Arcade

Minimum COS sides upto 30 ft (9m) height

Minimum COS sides above 30ft (9m) height

Minimum COS rear up to 30 ft (9m) height

Minimum COS rear up to 30 ft (9m) height

Up to 60
50.42 m²)

90%

1:2

None

None

5 ft (1.5m) x 5 ft (1.5m)

5 ft (1.5m) x 5 ft (1.5m)

61-299
(51.26-250 m²)

85%

1:2.50

None

5 ft (1.5m) x 5 ft (1.5m)

———-

300-399
(251-334 m²) 400-599
(335-501 m²)

GF 85% upper floor 75%

1:4

1:5

8 ft (2.5m)

5 ft (1.5m) on one side only
5 ft (1.5m)

10% of building height above 30 ft (9m) with a minimum of 5 ft (1.5m)

7 ft (2.1m)
8 ft (2.5m)

7 ft (2.1m)

600-799
(502-668 m²) 800-999
(669-835 m²)

70%

1:5 800-999
(669-835 m²) 1:5

7 ft for 1000-1999 sq yards 10 ft (3m) for over 2000 sq yards.

10% of building height above 30 ft (9m) with a minimum of 10 ft (3m)

10 ft (3m)

10% of building height above 30 ft (9m) with a minimum of 10 ft (3m)

1000-2000 (836-1672 m²)

65%

1:5.5

25-3.2. Other Conditions
1). For plots abutting public street at the rear, rear COS above 30 ft.(9m) shall be only minimum as specified for Plot size.

2). Plots where the allotment conditions or previous rules permit for higher FAR than the FAR noted in the above chart (25-3.1), the allotment conditions or previous regulations which provide for higher FAR shall be adopted.

3). In case of corner plot, COS on sides abutting the lane or road shall be condoned and arcade will be provided.

25-4. FLAT SITES CATEGORY